IP Alias just creates a 169.254.x.y where x.y is based on the MAC address.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jan 20, 2016 at 1:33 PM, That One Guy /sarcasm < [email protected]> wrote: > is that auto ip ilias thing causing this, if the cdp and other tickbox are > deselected you shouldnt be seeing any ips i dont thing > > On Wed, Jan 20, 2016 at 11:42 AM, CBB - Jay Fuller < > [email protected]> wrote: > >> >> here is the station list. again, the file we have show her radio as >> 10.8.19.56 ; not 106. We show she has a router at 106 >> >> >> ----- Original Message ----- >> *From:* CBB - Jay Fuller <[email protected]> >> *To:* Ubiquiti Users Group <[email protected]> ; [email protected] ; >> [email protected] >> *Sent:* Wednesday, January 20, 2016 11:40 AM >> *Subject:* weird ap-repeater setup issue with 5.6.3 firmware >> >> >> as many of you know, we've been going to 5.6.3 >> today we got a call from a customer who reported she is down. >> investigating, we discovered she is on a 900 mhz ubnt access point setup >> as an ap-repeater. >> This problem started after the firmware upgrade so we are assuming it's >> firmware related or perhaps >> something is treated differently in 5.6.3 (for example, we also had to >> update all of our oid's for graphing purposes) :) >> >> suggestions? >> >> >> >> we noticed no "transparent bridge" mode on an ap repeater, and we also >> noticed the station is showing connected, but it is showing the IP address >> of the customer's bridged router ; NOT the ip address of the radio. >> >> I have also tried checking the "auto" box briefly ; it did not change >> access to the radio. >> >> I can not access the radio although it shows connected. >> >> >> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
