I still have a SIP-T28P (B&W screen) on my desk and am perfectly happy with it.
For "budget" office setups on a tight budget you can occasionally find large numbers of the smaller screen B&W phones on eBay in good condition. Last year I bought eight SIP-T22P for $41 a piece with AC power adapter for an NGO with very limited funds. If you get a yealink phone without the power adapter and can't do 802.3af for whatever reason, the older B&W phones all run on 5VDC 1A adapters with a normal sized barrel plug, which you can buy for very cheap. On Tue, Jan 26, 2016 at 9:49 AM, Jon Auer <[email protected]> wrote: > +1. We're using the Yealink T4-series phones. Our office is all T46G & > T48G. We went from Cisco 7940s and these are a world of difference (for the > better), both in voice quality and tolerance/interop for NAT. > > I personally prefer the T41P/T42P as the 46 & 48 have a slight digit input > lag that bugs me. > > On Mon, Jan 25, 2016 at 3:38 PM, Eric Kuhnke <[email protected]> > wrote: > >> Take a look at the higher end Yealink phones. >> On Jan 25, 2016 11:47 AM, "Chuck McCown" <[email protected]> wrote: >> >>> Anyone used the Panasonic sip phones? I have a business office that >>> doesn’t like the UBNT products due to the feel of the handset etc. They >>> also want a DECT wireless option. >>> >>> Personally I am OK with AASTRA but in this situation I am trying to make >>> front office folks happy. We will be turning down their old panasonic key >>> system soon and I want to try to approximate the type of handset they have >>> been using. Could just swap handsets but they don’t work and they don’t >>> fit the switchhook of the sip phones. >>> >> >
