you have to push hard, really hard and if the din flexes or its backer does then poop
On Mon, Feb 29, 2016 at 2:04 PM, Ken Hohhof <[email protected]> wrote: > I’m talking about my experience that the clip won’t latch to the DIN rail > unless you pull the tab slightly forward. Not prying with a little > screwdriver to unlatch it, that’s expected. > > > *From:* Forrest Christian (List Account) <[email protected]> > *Sent:* Monday, February 29, 2016 1:33 PM > *To:* af <[email protected]> > *Subject:* Re: [AFMUG] racmount kit for Packetflux SyncInjector? > > > We just added common parts to the store late last week. Evidently we > need to do a better job of describing some of them. > > The end of the din clip on the syncinjector was hidden slightly behind the > syncinjector on purpose. The idea is that a small screwdriver can be > placed in the hole on the bottom of the din clip and the bottom of the > syncinjector can be used as a fulcrum point to enable easy removal of the > clip from the din rail. > On Feb 29, 2016 9:02 AM, "Ken Hohhof" <[email protected]> wrote: > >> No, I think you want this: >> >> http://store.packetflux.com/din-rail-mounting-kit-for-rev-h-i-syncinjectors/ >> >> The thing you linked to is essentially a tiny piece of plastic DIN rail >> for wallmounting stuff that is already DIN rail mountable. >> >> Also note the DIN rail mounting kit for Syncinjectors can be fussy about >> snapping onto the rail until you figure out the lever may need to be pulled >> forward a bit. Easy if you can get a finger behind it, if you have it in >> close quarters you might need to improvise a tool to hook it. >> >> >> *From:* Kurt Fankhauser <[email protected]> >> *Sent:* Monday, February 29, 2016 10:51 AM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] racmount kit for Packetflux SyncInjector? >> >> is this the proper product to DIN rail mount my sync injector? >> http://store.packetflux.com/din-rail-clip/ >> >> >> On Sun, Feb 28, 2016 at 9:21 PM, Jeremy <[email protected]> wrote: >> >>> Wow, I totally botched that earlier. The Brother printer FAQ is likely >>> not going to help with a Packetflux rack mount. Too many windows open! >>> >>> On Sun, Feb 28, 2016 at 2:08 PM, Jeremy <[email protected]> wrote: >>> >>>> This would probably work >>>> http://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=mfc8480dn_us&ftype3=1984&faqid=faq00000185_003 >>>> >>>> On Sun, Feb 28, 2016 at 12:34 PM, Chuck McCown <[email protected]> wrote: >>>> >>>>> Buy a small CNC milling machine. Get BUD or Hammond or others from >>>>> Mouser or Digi-Key and modify them. Only way to keep the cost out. >>>>> >>>>> *From:* Forrest Christian (List Account) <[email protected]> >>>>> *Sent:* Saturday, February 27, 2016 9:44 PM >>>>> *To:* af <[email protected]> >>>>> *Subject:* Re: [AFMUG] racmount kit for Packetflux SyncInjector? >>>>> >>>>> >>>>> The units are designed to fit on a standard 1u shelf. Zip ties. >>>>> Velcro. Bolts into the wall mount keyholes etc. >>>>> >>>>> On a related note, if anyone knows a enclosure manufacturer I can buy >>>>> custom 1u enclosures from in reasonable quantities (hundred or hundreds) >>>>> without paying an arm and three legs please let me know. We've been >>>>> having >>>>> a hard time finding a vendor... I lost track of how many vendors we've >>>>> unsuccessfully tried to get those from. >>>>> On Feb 27, 2016 11:33 AM, "Kurt Fankhauser" <[email protected]> >>>>> wrote: >>>>> >>>>>> Is there any rackmount kits out there for the packet flux sync >>>>>> injectors? Just looked over their website and only seen a DIN rail >>>>>> option? >>>>>> Is anyone making something possibly 3rd party for this? >>>>>> >>>>> >>>> >>> >>> >> >> > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
