Chris will make you just about whatever you want.
On Mon, Feb 29, 2016 at 3:57 PM, Eric Kuhnke <[email protected]> wrote: > I'm imagining a 900 MHz yagi arms race with 6' length and a whole cast iron > bathtub behind the mounting for rear/side shielding. > > The rf armor guy will probably sell a kit for $899... > > On Feb 29, 2016 8:50 AM, "Chuck McCown" <[email protected]> wrote: >> >> Roughly double the size for every 3 dB improvement in gain. >> >> From: Brandon Yuchasz >> Sent: Monday, February 29, 2016 9:49 AM >> To: [email protected] >> Subject: Re: [AFMUG] Laird ODH9-9 or Alternative >> >> >> Chuck how big would an antenna have to get to get up into the 9 or 10 dB >> range? >> >> >> >> Best regards, >> >> Brandon Yuchasz >> >> GogebicRange.net >> >> www.gogebicrange.net >> >> >> >> From: Af [mailto:[email protected]] On Behalf Of Chuck McCown >> Sent: Wednesday, February 24, 2016 5:01 PM >> To: [email protected] >> Subject: Re: [AFMUG] Laird ODH9-9 or Alternative >> >> >> >> Depends on gain. 6 dB would probably be 5 feet tall. >> >> >> >> From: Mathew Howard >> >> Sent: Wednesday, February 24, 2016 4:00 PM >> >> To: af >> >> Subject: Re: [AFMUG] Laird ODH9-9 or Alternative >> >> >> >> How tall would something like that be? >> >> >> >> On Wed, Feb 24, 2016 at 4:53 PM, Chuck McCown <[email protected]> wrote: >> >> I did a nice 6 dB H pol omni a few years ago. Never released it. I could >> do a dual slant 900 omni. It would be probably 8 inches in diameter. >> >> >> >> From: Chuck Hogg >> >> Sent: Wednesday, February 24, 2016 3:51 PM >> >> To: [email protected] >> >> Subject: Re: [AFMUG] Laird ODH9-9 or Alternative >> >> >> >> 9dB is what we have now. >> >> >> >> Regards, >> Chuck >> >> >> >> On Wed, Feb 24, 2016 at 4:39 PM, Chuck McCown <[email protected]> wrote: >> >> How much gain are you looking for? >> >> >> >> From: Chuck Hogg >> >> Sent: Wednesday, February 24, 2016 2:36 PM >> >> To: [email protected] ; [email protected] >> >> Subject: [AFMUG] Laird ODH9-9 or Alternative >> >> >> >> Hello: >> >> >> >> I recently just tried to get an ODH9-9 900MHz Horizontal Omni, to find out >> they quit making it. Every few years they have to be replaced because the >> internals rust out, but we are used to identifying the issue and replacing >> them when it happens. >> >> >> >> So, does anyone have any NIB ODH9-9 omnis they are willing to part with? >> Or am I going to have to switch to Amphenol? >> >> >> >> Regards, >> Chuck >> >> >> >>
