Thats why I used to make an array with 4 ninety degree Huber Suhner panels and combiner back in the 90s On Feb 29, 2016 5:17 PM, "Jaime Solorza" <[email protected]> wrote:
> Scala 900 omni is about 10ft > On Feb 29, 2016 9:50 AM, "Chuck McCown" <[email protected]> wrote: > >> Roughly double the size for every 3 dB improvement in gain. >> >> *From:* Brandon Yuchasz <[email protected]> >> *Sent:* Monday, February 29, 2016 9:49 AM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Laird ODH9-9 or Alternative >> >> >> Chuck how big would an antenna have to get to get up into the 9 or 10 dB >> range? >> >> >> >> Best regards, >> >> Brandon Yuchasz >> >> GogebicRange.net >> >> www.gogebicrange.net >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *Chuck McCown >> *Sent:* Wednesday, February 24, 2016 5:01 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Laird ODH9-9 or Alternative >> >> >> >> Depends on gain. 6 dB would probably be 5 feet tall. >> >> >> >> *From:* Mathew Howard <[email protected]> >> >> *Sent:* Wednesday, February 24, 2016 4:00 PM >> >> *To:* af <[email protected]> >> >> *Subject:* Re: [AFMUG] Laird ODH9-9 or Alternative >> >> >> >> How tall would something like that be? >> >> >> >> On Wed, Feb 24, 2016 at 4:53 PM, Chuck McCown <[email protected]> wrote: >> >> I did a nice 6 dB H pol omni a few years ago. Never released it. I >> could do a dual slant 900 omni. It would be probably 8 inches in diameter. >> >> >> >> *From:* Chuck Hogg <[email protected]> >> >> *Sent:* Wednesday, February 24, 2016 3:51 PM >> >> *To:* [email protected] >> >> *Subject:* Re: [AFMUG] Laird ODH9-9 or Alternative >> >> >> >> 9dB is what we have now. >> >> >> >> Regards, >> Chuck >> >> >> >> On Wed, Feb 24, 2016 at 4:39 PM, Chuck McCown <[email protected]> wrote: >> >> How much gain are you looking for? >> >> >> >> *From:* Chuck Hogg <[email protected]> >> >> *Sent:* Wednesday, February 24, 2016 2:36 PM >> >> *To:* [email protected] ; [email protected] >> >> *Subject:* [AFMUG] Laird ODH9-9 or Alternative >> >> >> >> Hello: >> >> >> >> I recently just tried to get an ODH9-9 900MHz Horizontal Omni, to find >> out they quit making it. Every few years they have to be replaced because >> the internals rust out, but we are used to identifying the issue and >> replacing them when it happens. >> >> >> >> So, does anyone have any NIB ODH9-9 omnis they are willing to part with? >> Or am I going to have to switch to Amphenol? >> >> >> >> Regards, >> Chuck >> >> >> >> >> >
