And that antenna is very expensive. We (Crossover) discussed with them the market for that antenna, but it is optimized for the cellular world so its cost prohibitive for the broadband wireless world (no one cares about PIM in the unlicensed bands).
Thank you, Daniel White <mailto:[email protected]> [email protected] Cell: +1 (303) 746-3590 Skype: danieldwhite Social: <http://www.linkedin.com/in/danielwhite84> LinkedIn: <https://twitter.com/DanielWhite84> Twitter From: Af [mailto:[email protected]] On Behalf Of Ken Hohhof Sent: Monday, February 29, 2016 3:19 PM To: [email protected] Subject: Re: [AFMUG] Laird ODH9-9 or Alternative What Chuck is talking about would I guess be similar to this: http://alphaantennas.com/products/small-cells/aw3464/ I’d hate to see that thing twice as big. From: Eric Kuhnke <mailto:[email protected]> Sent: Monday, February 29, 2016 3:57 PM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] Laird ODH9-9 or Alternative I'm imagining a 900 MHz yagi arms race with 6' length and a whole cast iron bathtub behind the mounting for rear/side shielding. The rf armor guy will probably sell a kit for $899... On Feb 29, 2016 8:50 AM, "Chuck McCown" <[email protected] <mailto:[email protected]> > wrote: Roughly double the size for every 3 dB improvement in gain. From: Brandon Yuchasz <mailto:[email protected]> Sent: Monday, February 29, 2016 9:49 AM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] Laird ODH9-9 or Alternative Chuck how big would an antenna have to get to get up into the 9 or 10 dB range? Best regards, Brandon Yuchasz GogebicRange.net www.gogebicrange.net <http://www.gogebicrange.net/> From: Af [mailto:[email protected] <mailto:[email protected]> ] On Behalf Of Chuck McCown Sent: Wednesday, February 24, 2016 5:01 PM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] Laird ODH9-9 or Alternative Depends on gain. 6 dB would probably be 5 feet tall. From: Mathew Howard <mailto:[email protected]> Sent: Wednesday, February 24, 2016 4:00 PM To: af <mailto:[email protected]> Subject: Re: [AFMUG] Laird ODH9-9 or Alternative How tall would something like that be? On Wed, Feb 24, 2016 at 4:53 PM, Chuck McCown <[email protected] <mailto:[email protected]> > wrote: I did a nice 6 dB H pol omni a few years ago. Never released it. I could do a dual slant 900 omni. It would be probably 8 inches in diameter. From: Chuck Hogg <mailto:[email protected]> Sent: Wednesday, February 24, 2016 3:51 PM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] Laird ODH9-9 or Alternative 9dB is what we have now. Regards, Chuck On Wed, Feb 24, 2016 at 4:39 PM, Chuck McCown <[email protected] <mailto:[email protected]> > wrote: How much gain are you looking for? From: Chuck Hogg <mailto:[email protected]> Sent: Wednesday, February 24, 2016 2:36 PM To: [email protected] <mailto:[email protected]> ; [email protected] <mailto:[email protected]> Subject: [AFMUG] Laird ODH9-9 or Alternative Hello: I recently just tried to get an ODH9-9 900MHz Horizontal Omni, to find out they quit making it. Every few years they have to be replaced because the internals rust out, but we are used to identifying the issue and replacing them when it happens. So, does anyone have any NIB ODH9-9 omnis they are willing to part with? Or am I going to have to switch to Amphenol? Regards, Chuck --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
