Those NUC thingies are really cute, but the latest ones seem very very pricey.  
What am I missing?

From: Eric Kuhnke 
Sent: Tuesday, March 22, 2016 8:45 PM
To: [email protected] 
Subject: Re: [AFMUG] PowerDNS vs Bind for Resolver

Power is how expensive?


At one of the largest carrier hotels/biggest IX points in north america, I've 
calculated the cost of power to be around 23 cents/kWh...  That's with the 
building providing multiply redundant 2 megawatt generators, diverse city power 
feeds, and taking into account the building's cost for air conditioning.


Based on these calculations for a high density, high power colo cabinet


one 208V 30A circuit = 6240W


You can use about 85% of that safely, so you've got 5304W load possible


if you use 5304W for a month 24x7 you've got 3946kWh consumed in a month


$900/month for that electrical circuit divided by 3946 = 22.8 cents per kWh



so uhm...  a 15W Intel NUC sized thing running solid for a month is 11.16 kWh 
consumed in a month, or about $2.50 of electricity.  Does it really make a 
difference to use a raspberry pi?




On Tue, Mar 22, 2016 at 6:26 PM, Graham McIntire <[email protected]> wrote:

  I haven't had any of them die on me from SD card write failure yet, though 
I've been worried about it. I keep spares of everything in case of failure, but 
they're cheap enough you could set up a huge VRRP cluster or something to 
eliminate any down time. Power is expensive at the building with our fiber, and 
by using Pis I'm able to keep the air conditioner off and save a good chunk of 
money every month.

  On Wed, Mar 2, 2016 at 6:14 PM, Paul Stewart <[email protected]> wrote:

    I like Raspberry Pi units … but I wouldn’t think of using them for servers 
… YMMV .. I think of them more as “useful toys”…. For servers I need redundant 
disc (minimum two Intel SSD w/hardware RAID1), redundant power etc… could be 
blades or physical servers.



    Now one could argue that for something like DNS, you have redundancy via 
the application too … I completely get that ..



    From: Af [mailto:[email protected]] On Behalf Of Matt
    Sent: Wednesday, March 2, 2016 12:34 PM


    To: [email protected]
    Subject: Re: [AFMUG] PowerDNS vs Bind for Resolver


    Was thinking about moving some servers to Raspberry Pi.  I like they take 
up very little rack space and power and with quad cores are pretty fast and now 
they support Centos.  Have you had any issues with flash dying after too many 
writes?







    On Sun, Feb 28, 2016 at 8:46 PM, Graham McIntire <[email protected]> wrote:

      I run unbound on 2 raspberry Pi 2's, and they consistently outperform any 
other internal or external server I've set up.



      On Sun, Feb 28, 2016 at 8:05 PM, Paul Stewart <[email protected]> 
wrote:

        +100 on that one … 



        From: Af [mailto:[email protected]] On Behalf Of Mike Hammett
        Sent: Sunday, February 28, 2016 11:32 AM
        To: [email protected]
        Subject: Re: [AFMUG] PowerDNS vs Bind for Resolver



        Unbound.



        -----
        Mike Hammett
        Intelligent Computing Solutions

        Midwest Internet Exchange

        The Brothers WISP






------------------------------------------------------------------------

        From: "Matt" <[email protected]>
        To: [email protected]
        Sent: Sunday, February 28, 2016 10:29:19 AM
        Subject: [AFMUG] PowerDNS vs Bind for Resolver

        For a simple non-authorative resolver running on Centos do most prefer
        Bind or PowerDNS?








Reply via email to