one of the problems of a NUC (or a similar thing from Asus, MSI, other
taiwanese vendors) is that many of them use 19VDC input and their own
120VAC brick power supplies. It's not like you can just feed a couple dozen
of them with 12VDC on 12AWG stranded wire.


On Tue, Mar 22, 2016 at 8:18 PM, Josh Reynolds <[email protected]> wrote:

> Depends on the hardware configuration of the VM stack, but a nuc based
> systems would, for sure, have better physical redundancy. Similar to a
> chassis based system, minus the chassis itself being a potential failure
> point. The would still be layers of inefficiencies, but as with anything
> there are tradeoffs.
> On Mar 22, 2016 10:11 PM, "That One Guy /sarcasm" <
> [email protected]> wrote:
>
>> Why not virtual machines? Granted there is some overhead for the
>> hypervisor but better use of the platform and simply full disaster recovery.
>> On Mar 22, 2016 9:34 PM, "Josh Reynolds" <[email protected]> wrote:
>>
>>> Small footprint, can fit many in 2u. Low power draw, high performance.
>>> They do dissipate quite a bit of heat though. They would make good compute
>>> nodes.
>>> On Mar 22, 2016 9:21 PM, "Ken Hohhof" <[email protected]> wrote:
>>>
>>>> Those NUC thingies are really cute, but the latest ones seem very very
>>>> pricey.  What am I missing?
>>>>
>>>> *From:* Eric Kuhnke <[email protected]>
>>>> *Sent:* Tuesday, March 22, 2016 8:45 PM
>>>> *To:* [email protected]
>>>> *Subject:* Re: [AFMUG] PowerDNS vs Bind for Resolver
>>>>
>>>> Power is how expensive?
>>>>
>>>> At one of the largest carrier hotels/biggest IX points in north
>>>> america, I've calculated the cost of power to be around 23 cents/kWh...
>>>> That's with the building providing multiply redundant 2 megawatt
>>>> generators, diverse city power feeds, and taking into account the
>>>> building's cost for air conditioning.
>>>>
>>>> Based on these calculations for a high density, high power colo cabinet
>>>>
>>>> one 208V 30A circuit = 6240W
>>>>
>>>> You can use about 85% of that safely, so you've got 5304W load possible
>>>>
>>>> if you use 5304W for a month 24x7 you've got 3946kWh consumed in a month
>>>>
>>>> $900/month for that electrical circuit divided by 3946 = 22.8 cents per
>>>> kWh
>>>>
>>>>
>>>> so uhm...  a 15W Intel NUC sized thing running solid for a month is
>>>> 11.16 kWh consumed in a month, or about $2.50 of electricity.  Does it
>>>> really make a difference to use a raspberry pi?
>>>>
>>>>
>>>>
>>>> On Tue, Mar 22, 2016 at 6:26 PM, Graham McIntire <[email protected]>
>>>> wrote:
>>>>
>>>>> I haven't had any of them die on me from SD card write failure yet,
>>>>> though I've been worried about it. I keep spares of everything in case of
>>>>> failure, but they're cheap enough you could set up a huge VRRP cluster or
>>>>> something to eliminate any down time. Power is expensive at the building
>>>>> with our fiber, and by using Pis I'm able to keep the air conditioner off
>>>>> and save a good chunk of money every month.
>>>>>
>>>>> On Wed, Mar 2, 2016 at 6:14 PM, Paul Stewart <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> I like Raspberry Pi units … but I wouldn’t think of using them for
>>>>>> servers … YMMV .. I think of them more as “useful toys”…. For servers I
>>>>>> need redundant disc (minimum two Intel SSD w/hardware RAID1), redundant
>>>>>> power etc… could be blades or physical servers.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Now one could argue that for something like DNS, you have redundancy
>>>>>> via the application too … I completely get that ..
>>>>>>
>>>>>>
>>>>>>
>>>>>> *From:* Af [mailto:[email protected]] *On Behalf Of *Matt
>>>>>> *Sent:* Wednesday, March 2, 2016 12:34 PM
>>>>>>
>>>>>> *To:* [email protected]
>>>>>> *Subject:* Re: [AFMUG] PowerDNS vs Bind for Resolver
>>>>>>
>>>>>>
>>>>>>
>>>>>> Was thinking about moving some servers to Raspberry Pi.  I like they
>>>>>> take up very little rack space and power and with quad cores are pretty
>>>>>> fast and now they support Centos.  Have you had any issues with flash 
>>>>>> dying
>>>>>> after too many writes?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sun, Feb 28, 2016 at 8:46 PM, Graham McIntire <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>> I run unbound on 2 raspberry Pi 2's, and they consistently outperform
>>>>>> any other internal or external server I've set up.
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sun, Feb 28, 2016 at 8:05 PM, Paul Stewart <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>> +100 on that one …
>>>>>>
>>>>>>
>>>>>>
>>>>>> *From:* Af [mailto:[email protected]] *On Behalf Of *Mike Hammett
>>>>>> *Sent:* Sunday, February 28, 2016 11:32 AM
>>>>>> *To:* [email protected]
>>>>>> *Subject:* Re: [AFMUG] PowerDNS vs Bind for Resolver
>>>>>>
>>>>>>
>>>>>>
>>>>>> Unbound.
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----
>>>>>> Mike Hammett
>>>>>> Intelligent Computing Solutions <http://www.ics-il.com/>
>>>>>> <https://www.facebook.com/ICSIL>
>>>>>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb>
>>>>>> <https://www.linkedin.com/company/intelligent-computing-solutions>
>>>>>> <https://twitter.com/ICSIL>
>>>>>> Midwest Internet Exchange <http://www.midwest-ix.com/>
>>>>>> <https://www.facebook.com/mdwestix>
>>>>>> <https://www.linkedin.com/company/midwest-internet-exchange>
>>>>>> <https://twitter.com/mdwestix>
>>>>>> The Brothers WISP <http://www.thebrotherswisp.com/>
>>>>>> <https://www.facebook.com/thebrotherswisp>
>>>>>>
>>>>>>
>>>>>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
>>>>>> ------------------------------
>>>>>>
>>>>>> *From: *"Matt" <[email protected]>
>>>>>> *To: *[email protected]
>>>>>> *Sent: *Sunday, February 28, 2016 10:29:19 AM
>>>>>> *Subject: *[AFMUG] PowerDNS vs Bind for Resolver
>>>>>>
>>>>>> For a simple non-authorative resolver running on Centos do most prefer
>>>>>> Bind or PowerDNS?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>

Reply via email to