Small footprint, can fit many in 2u. Low power draw, high performance. They
do dissipate quite a bit of heat though. They would make good compute nodes.
On Mar 22, 2016 9:21 PM, "Ken Hohhof" <[email protected]> wrote:

> Those NUC thingies are really cute, but the latest ones seem very very
> pricey.  What am I missing?
>
> *From:* Eric Kuhnke <[email protected]>
> *Sent:* Tuesday, March 22, 2016 8:45 PM
> *To:* [email protected]
> *Subject:* Re: [AFMUG] PowerDNS vs Bind for Resolver
>
> Power is how expensive?
>
> At one of the largest carrier hotels/biggest IX points in north america,
> I've calculated the cost of power to be around 23 cents/kWh...  That's with
> the building providing multiply redundant 2 megawatt generators, diverse
> city power feeds, and taking into account the building's cost for air
> conditioning.
>
> Based on these calculations for a high density, high power colo cabinet
>
> one 208V 30A circuit = 6240W
>
> You can use about 85% of that safely, so you've got 5304W load possible
>
> if you use 5304W for a month 24x7 you've got 3946kWh consumed in a month
>
> $900/month for that electrical circuit divided by 3946 = 22.8 cents per kWh
>
>
> so uhm...  a 15W Intel NUC sized thing running solid for a month is 11.16
> kWh consumed in a month, or about $2.50 of electricity.  Does it really
> make a difference to use a raspberry pi?
>
>
>
> On Tue, Mar 22, 2016 at 6:26 PM, Graham McIntire <[email protected]> wrote:
>
>> I haven't had any of them die on me from SD card write failure yet,
>> though I've been worried about it. I keep spares of everything in case of
>> failure, but they're cheap enough you could set up a huge VRRP cluster or
>> something to eliminate any down time. Power is expensive at the building
>> with our fiber, and by using Pis I'm able to keep the air conditioner off
>> and save a good chunk of money every month.
>>
>> On Wed, Mar 2, 2016 at 6:14 PM, Paul Stewart <[email protected]>
>> wrote:
>>
>>> I like Raspberry Pi units … but I wouldn’t think of using them for
>>> servers … YMMV .. I think of them more as “useful toys”…. For servers I
>>> need redundant disc (minimum two Intel SSD w/hardware RAID1), redundant
>>> power etc… could be blades or physical servers.
>>>
>>>
>>>
>>> Now one could argue that for something like DNS, you have redundancy via
>>> the application too … I completely get that ..
>>>
>>>
>>>
>>> *From:* Af [mailto:[email protected]] *On Behalf Of *Matt
>>> *Sent:* Wednesday, March 2, 2016 12:34 PM
>>>
>>> *To:* [email protected]
>>> *Subject:* Re: [AFMUG] PowerDNS vs Bind for Resolver
>>>
>>>
>>>
>>> Was thinking about moving some servers to Raspberry Pi.  I like they
>>> take up very little rack space and power and with quad cores are pretty
>>> fast and now they support Centos.  Have you had any issues with flash dying
>>> after too many writes?
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Sun, Feb 28, 2016 at 8:46 PM, Graham McIntire <[email protected]>
>>> wrote:
>>>
>>> I run unbound on 2 raspberry Pi 2's, and they consistently outperform
>>> any other internal or external server I've set up.
>>>
>>>
>>>
>>> On Sun, Feb 28, 2016 at 8:05 PM, Paul Stewart <[email protected]>
>>> wrote:
>>>
>>> +100 on that one …
>>>
>>>
>>>
>>> *From:* Af [mailto:[email protected]] *On Behalf Of *Mike Hammett
>>> *Sent:* Sunday, February 28, 2016 11:32 AM
>>> *To:* [email protected]
>>> *Subject:* Re: [AFMUG] PowerDNS vs Bind for Resolver
>>>
>>>
>>>
>>> Unbound.
>>>
>>>
>>>
>>> -----
>>> Mike Hammett
>>> Intelligent Computing Solutions <http://www.ics-il.com/>
>>> <https://www.facebook.com/ICSIL>
>>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb>
>>> <https://www.linkedin.com/company/intelligent-computing-solutions>
>>> <https://twitter.com/ICSIL>
>>> Midwest Internet Exchange <http://www.midwest-ix.com/>
>>> <https://www.facebook.com/mdwestix>
>>> <https://www.linkedin.com/company/midwest-internet-exchange>
>>> <https://twitter.com/mdwestix>
>>> The Brothers WISP <http://www.thebrotherswisp.com/>
>>> <https://www.facebook.com/thebrotherswisp>
>>>
>>>
>>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
>>> ------------------------------
>>>
>>> *From: *"Matt" <[email protected]>
>>> *To: *[email protected]
>>> *Sent: *Sunday, February 28, 2016 10:29:19 AM
>>> *Subject: *[AFMUG] PowerDNS vs Bind for Resolver
>>>
>>> For a simple non-authorative resolver running on Centos do most prefer
>>> Bind or PowerDNS?
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>
>

Reply via email to