Gotcha. From: Af [mailto:[email protected]] On Behalf Of Forrest Christian (List Account) Sent: Wednesday, March 30, 2016 2:12 AM To: af Subject: Re: [AFMUG] POE + standard
There's no internal gps, so you have to use an external sync source. Both timing port and power port options are available, but they changed the timing port enough that only certain sync sources will work. The only two I'm aware of for certain are the newest revision syncbox 12 and the cambium ugps. There are a couple others on the roadmap here but they're going to be a month or two out. On Mar 29, 2016 11:33 PM, "Paul McCall" <[email protected]<mailto:[email protected]>> wrote: What are the options? No timing port? (haven’t looked at them yet) From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Forrest Christian (List Account) Sent: Tuesday, March 29, 2016 11:14 PM To: af Subject: Re: [AFMUG] POE + standard Just be aware there are very limited options for getting sync into a 450i if you don't use sync over the power port. On Mar 29, 2016 1:22 PM, "Sean Heskett" <[email protected]<mailto:[email protected]>> wrote: the 450i does the 450 is the "old canopy" standard. On Tue, Mar 29, 2016 at 1:14 PM, Paul McCall <[email protected]<mailto:[email protected]>> wrote: Does Cambium’s new 450 gear (APs) support POE + ? From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Paul McCall Sent: Tuesday, March 29, 2016 1:56 PM To: [email protected]<mailto:[email protected]> Subject: [AFMUG] POE + standard Is it possible to get a device not specifically designed for a POE + injector to work off that? I have tried a device (namely a 320AP with the pin 4 and 8 swapped to provide the proper + - on 4, 5 and +- on 7,8) and the POE device (actually an edgepoint S16) doesn’t seem to react to it. I know the cable is good (tested using another method). When you pick POE+ within the Edgepoint, no indicator lights come on on the Edgepoint (unlike any the other POE settings which have indicator lights active to show the appropriate power activation). Hoping to make this work somehow Paul, PDMNet
