Nope, just cost.
On 3/30/2016 8:59 AM, Ken Hohhof wrote:
Does anyone use the UGPS? Is it the cost that turns people off, or
something else?
*From:* Forrest Christian (List Account) <mailto:[email protected]>
*Sent:* Wednesday, March 30, 2016 1:12 AM
*To:* af <mailto:[email protected]>
*Subject:* Re: [AFMUG] POE + standard
There's no internal gps, so you have to use an external sync
source. Both timing port and power port options are available, but
they changed the timing port enough that only certain sync sources
will work. The only two I'm aware of for certain are the newest
revision syncbox 12 and the cambium ugps. There are a couple others
on the roadmap here but they're going to be a month or two out.
On Mar 29, 2016 11:33 PM, "Paul McCall" <[email protected]
<mailto:[email protected]>> wrote:
What are the options? No timing port? (haven’t looked at them yet)
*From:*Af [mailto:[email protected]
<mailto:[email protected]>] *On Behalf Of *Forrest Christian
(List Account)
*Sent:* Tuesday, March 29, 2016 11:14 PM
*To:* af
*Subject:* Re: [AFMUG] POE + standard
Just be aware there are very limited options for getting sync into
a 450i if you don't use sync over the power port.
On Mar 29, 2016 1:22 PM, "Sean Heskett" <[email protected]
<mailto:[email protected]>> wrote:
the 450i does
the 450 is the "old canopy" standard.
On Tue, Mar 29, 2016 at 1:14 PM, Paul McCall <[email protected]
<mailto:[email protected]>> wrote:
Does Cambium’s new 450 gear (APs) support POE + ?
*From:*Af [mailto:[email protected]
<mailto:[email protected]>] *On Behalf Of *Paul McCall
*Sent:* Tuesday, March 29, 2016 1:56 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* [AFMUG] POE + standard
Is it possible to get a device not specifically designed for a POE
+ injector to work off that? I have tried a device (namely a
320AP with the pin 4 and 8 swapped to provide the proper + - on
4, 5 and +- on 7,8) and the POE device (actually an edgepoint S16)
doesn’t seem to react to it. I know the cable is good (tested
using another method). When you pick POE+ within the Edgepoint,
no indicator lights come on on the Edgepoint (unlike any the other
POE settings which have indicator lights active to show the
appropriate power activation).
Hoping to make this work somehow
Paul, PDMNet
