Just be aware there are very limited options for getting sync into a 450i if you don't use sync over the power port. On Mar 29, 2016 1:22 PM, "Sean Heskett" <af...@zirkel.us> wrote:
> the 450i does > > the 450 is the "old canopy" standard. > > On Tue, Mar 29, 2016 at 1:14 PM, Paul McCall <pa...@pdmnet.net> wrote: > >> Does Cambium’s new 450 gear (APs) support POE + ? >> >> >> >> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Paul McCall >> *Sent:* Tuesday, March 29, 2016 1:56 PM >> *To:* af@afmug.com >> *Subject:* [AFMUG] POE + standard >> >> >> >> >> >> Is it possible to get a device not specifically designed for a POE + >> injector to work off that? I have tried a device (namely a 320AP with the >> pin 4 and 8 swapped to provide the proper + - on 4, 5 and +- on 7,8) and >> the POE device (actually an edgepoint S16) doesn’t seem to react to it. I >> know the cable is good (tested using another method). When you pick POE+ >> within the Edgepoint, no indicator lights come on on the Edgepoint (unlike >> any the other POE settings which have indicator lights active to show the >> appropriate power activation). >> >> >> >> Hoping to make this work somehow >> >> >> >> Paul, PDMNet >> > >
