For a better answer, Powercode does the bandwidth and such already but here are the ePMP specific probes:
[image: Inline image 1] With Airos 5.6+ you can get some good stuff too. Monitoring all of these have proved useful. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jun 14, 2016 at 11:00 AM, Nate Burke <[email protected]> wrote: > I monitor all SM's directly (FSK,450 and EPMP).� Makes it very easy to > see if they have changing signal levels, or when they dropped out.� Like > if they slowly lose signal the entire month of May, then you know it's > trees.� But if they just lost 20db one day, then it moved.� If it just > dropped offline, then power supply.� Also monitor the Sub Bandwidth, when > they say 'No internet for a 2 days'� You can tell them 'Check with your > Kids, because someone has been streaming non stop'.� Or the '2 days' > really is only 2 hours, but they want you to think it's worse. > > On 6/14/2016 9:25 AM, Brandon Yuchasz wrote: > > Since I came from a FSK background and then started in on the 450 platform > I am having a few issues troubleshooting customers on ePMP. In FSK and 450 > you can log into the AP pull up the Session Status tab and then scroll > through looking at the session counts, re-registrations, power levels and > even see the SMs that are idle. So if you are looking up a customer that > �hasn�t has internet since Monday� and you see they went idle with > only one session count and a� -62 at the time. You can assume the power > supply got damaged in the storm Monday afternoon. A little on the phone > support and they verify no green light.� On the other hand now that the > leaves are on the trees and nice and thick we can scroll through the > session counts and find customers that have been up for 8 years that are > now having issues with the tree cover. 568 session counts in 24 hours. Yep > best put them in the schedule and get out at take a look. > > � > > So�. Where the heck do I find similar information in ePMP. I can�t > even find if a session is idle.� I can find how many SMs have registered > to the AP but no specifics about which SM it was or if all the extras are > one SM , guys doing site surveys or a combo of both. So how are you guys > troubleshooting the ePMP platform? I feel blind using this stuff. > > � > > Best regards, > > Brandon Yuchasz > > GogebicRange.net > > www.gogebicrange.net > > � > > >
