The AF24 GUI with the current firmware doesn't report null/complete loss of signal if it's receiving nothing on one chain? Maybe Chuck from ubnt can confirm?
On Mon, Jul 18, 2016 at 4:24 PM, George Skorup <[email protected]> wrote: > Look at your remote mod rate. 1X. That's what the remote is transmitting > towards the local end. I believe when they're in SISO, the Chain 1 signal > reading is meaningless. > > On 7/18/2016 6:20 PM, Sam Lambie wrote: > > I'll look tomorrow. It's beer 30 here. > > On Mon, Jul 18, 2016 at 5:19 PM, Josh Reynolds <[email protected]> > wrote: > >> Anything in the path? >> >> On Jul 18, 2016 6:11 PM, "Sam Lambie" <[email protected]> wrote: >> >>> I am seeing what I think is interference on a 24 ghz AirFiber. I tried >>> changing the channel from 24.1 to 24.2 but no go. Could the radio be going >>> bad or is there something else that I am missing? >>> The receive levels will bounce from -61 to -47 and then go away >>> completely on Chain1. With only 80+ mbps on the capacity. >>> Any suggestions welcomed. >>> >>> [image: Inline image 1] >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > > >
