Firmware 2.0 with 598 days uptime. Just rebooted the sucker. Hopefully it comes back up...
On Mon, Jul 18, 2016 at 5:26 PM, Eric Kuhnke <[email protected]> wrote: > The AF24 GUI with the current firmware doesn't report null/complete loss > of signal if it's receiving nothing on one chain? Maybe Chuck from ubnt can > confirm? > > > On Mon, Jul 18, 2016 at 4:24 PM, George Skorup <[email protected]> wrote: > >> Look at your remote mod rate. 1X. That's what the remote is transmitting >> towards the local end. I believe when they're in SISO, the Chain 1 signal >> reading is meaningless. >> >> On 7/18/2016 6:20 PM, Sam Lambie wrote: >> >> I'll look tomorrow. It's beer 30 here. >> >> On Mon, Jul 18, 2016 at 5:19 PM, Josh Reynolds <[email protected]> >> wrote: >> >>> Anything in the path? >>> >>> On Jul 18, 2016 6:11 PM, "Sam Lambie" <[email protected]> wrote: >>> >>>> I am seeing what I think is interference on a 24 ghz AirFiber. I tried >>>> changing the channel from 24.1 to 24.2 but no go. Could the radio be going >>>> bad or is there something else that I am missing? >>>> The receive levels will bounce from -61 to -47 and then go away >>>> completely on Chain1. With only 80+ mbps on the capacity. >>>> Any suggestions welcomed. >>>> >>>> [image: Inline image 1] >>>> >>>> -- >>>> -- >>>> *Sam Lambie* >>>> Taosnet Wireless Tech. >>>> 575-758-7598 Office >>>> www.Taosnet.com <http://www.newmex.com> >>>> >>> >> >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> >> >> > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
