came back up, but that didn't fix it. I'll tweak on it tomorrow. On Mon, Jul 18, 2016 at 5:27 PM, Sam Lambie <[email protected]> wrote:
> Firmware 2.0 with 598 days uptime. Just rebooted the sucker. Hopefully it > comes back up... > > On Mon, Jul 18, 2016 at 5:26 PM, Eric Kuhnke <[email protected]> > wrote: > >> The AF24 GUI with the current firmware doesn't report null/complete loss >> of signal if it's receiving nothing on one chain? Maybe Chuck from ubnt can >> confirm? >> >> >> On Mon, Jul 18, 2016 at 4:24 PM, George Skorup <[email protected]> wrote: >> >>> Look at your remote mod rate. 1X. That's what the remote is transmitting >>> towards the local end. I believe when they're in SISO, the Chain 1 signal >>> reading is meaningless. >>> >>> On 7/18/2016 6:20 PM, Sam Lambie wrote: >>> >>> I'll look tomorrow. It's beer 30 here. >>> >>> On Mon, Jul 18, 2016 at 5:19 PM, Josh Reynolds <[email protected]> >>> wrote: >>> >>>> Anything in the path? >>>> >>>> On Jul 18, 2016 6:11 PM, "Sam Lambie" <[email protected]> wrote: >>>> >>>>> I am seeing what I think is interference on a 24 ghz AirFiber. I tried >>>>> changing the channel from 24.1 to 24.2 but no go. Could the radio be going >>>>> bad or is there something else that I am missing? >>>>> The receive levels will bounce from -61 to -47 and then go away >>>>> completely on Chain1. With only 80+ mbps on the capacity. >>>>> Any suggestions welcomed. >>>>> >>>>> [image: Inline image 1] >>>>> >>>>> -- >>>>> -- >>>>> *Sam Lambie* >>>>> Taosnet Wireless Tech. >>>>> 575-758-7598 Office >>>>> www.Taosnet.com <http://www.newmex.com> >>>>> >>>> >>> >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com <http://www.newmex.com> >>> >>> >>> >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
