The surge suppressors we have at that site are L-com/Hyperlinks. A
couple were blown top and bottom. Another radio was only the top and
another only the bottom. The 900 AP board wasn't burned up, but dead.
Lost that port on the MikroTik. Both SS's on that were dead. I'm going
to rebuild everything at that site and use GIGE-APCs at least at the bottom.
What SS did you have on the Mimosa?
On 8/13/2016 5:47 PM, Jason McKemie wrote:
Yeah, I had a Ubiquiti Rocket and some nanobridges on the same tower,
albeit lower, that didn't skip a beat. I go to all of the trouble of
running dedicated power and optical, only to have some cheap Ubiquiti
stuff outlive it - makes you wonder. The surge on the Mimosa went
through the SS and knocked out a port on my CCR - guess that will have
to be replaced as well.
On Sat, Aug 13, 2016 at 5:43 PM, George Skorup <[email protected]
<mailto:[email protected]>> wrote:
Had a 5.7 Cyclone omni and a Antel 900 omni. So we flew the
Phantom up first to see if those antennas were vaporized.
Surprisingly they were still there. The Cyclone still worked, but
the timing port was dead. Power port timing died on it last year.
450 sectors, AF24 and a Force200 were perfectly fine. Some stuff
and not others, I don't get it. It killed the inverter in the APC
UPS. No doubt it came in on the utility after discovering that.
And then all of the tripped breakers after that. Yeah, that'll be
the next tower to get a DC UPS. And a whole panel surge suppressor.
On 8/13/2016 5:28 PM, Jason McKemie wrote:
I lost a SIAE radio as well as a Mimosa A5 - both were
properly grounded, the SIAE was optical with dedicated power
wires as well. Also had a couple customer's routers get
fried. Overall, not a fun day. I would rather be at Lake
Shelbyville...
