Yep, that’s the exact idea Chuck From: Af [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, August 29, 2016 11:55 AM To: [email protected] Subject: Re: [AFMUG] Teflon isolation material
I presume that if you insulated your gear and ran a separate ground wire back to a master ground bar it would probably work OK. Better than relying on the tower. And insulating the gear makes sure that your separate ground wire is not becoming the primary ground circuit for the whole tower. From: Jaime Solorza<mailto:[email protected]> Sent: Monday, August 29, 2016 9:52 AM To: Animal Farm<mailto:[email protected]> Subject: Re: [AFMUG] Teflon isolation material Hey it worked for Reagan. Zaz... All kidding aside. How do you apply it? Like ducting aluminum tape? On Aug 29, 2016 9:02 AM, "Paul McCall" <[email protected]<mailto:[email protected]>> wrote: Anybody used Teflon isolation material to isolate your equipment from other metal structures? The thought being if the metal structure you are mounting to has poor grounding and you can’t fix for whatever reason, without spending a bazillion dollars A grounding expert mentioned that yesterday as a possible fix to our problems at a couple towers we have no control over Paul Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800<tel:772-564-6800> [email protected]<mailto:[email protected]> www.pdmnet.com<http://www.pdmnet.com> www.floridabroadband.com<http://www.floridabroadband.com>
