Use a simple arp -a command... On Sep 21, 2016 5:38 PM, "That One Guy /sarcasm" <thatoneguyst...@gmail.com> wrote:
> luckily they happened to find a machine he could access on the local > network/subnet and found it. > I find it humorous that i was sitting in my garage building stuff for my > crummy job at a podunk isp walking a guy at a multibillion dollar company > through circumventing "security" to gain access to a device a guy who makes > 3 times what I make couldnt bother to verify before he sent it halfway > across the country to be a component of a critical monitoring system, all > via facebook messenger. > > On Wed, Sep 21, 2016 at 4:47 PM, Steve Utick <sut...@gmail.com> wrote: > >> There is no CLI packet capture. He could do an RSPAN to a local device, >> but that's rather complicated to set up. Is the 3650 in L3 mode? He could >> do a show ip arp, and see if the IP shows up with the MAC address, or go to >> the routing device and do a show ip arp. You can add in the MAC address in >> the show ip arp as well to filter it down and just show that device. >> >> >> On Wed, Sep 21, 2016 at 3:15 PM, That One Guy /sarcasm < >> thatoneguyst...@gmail.com> wrote: >> >>> have a buddy trying to locate the ip on a camera that hes remote to, he >>> has access to the remote cisco 3650 its attached to, he can see the mac, so >>> he knows the port. but he has no rights to capture remotely to his machine >>> I was wondering if there is a cli packet capture like tcpdump he could >>> do to verify what IP is on it >>> >>> -- >>> If you only see yourself as part of the team but you don't see your team >>> as part of yourself you have already failed as part of the team. >>> >> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
