Why they make the 1072, then loop in a number of 10gig devices to add copper. Etc.. Or just drop in some switches.
Dennis Burgess – Network Solution Engineer – Consultant MikroTik Certified Trainer/Consultant – MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE For Wireless Hardware/Routers visit www.linktechs.net Radio Frequiency Coverages: www.towercoverage.com Office: 314-735-0270 E-Mail: [email protected] -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Steve Sent: Thursday, October 6, 2016 8:21 AM To: af <[email protected]> Subject: Re: [AFMUG] suggestions for WISP headend Mikrotik We are using several CCR1036-8G-2S+ units and they are awesome. The day is coming though eventually when we will need something with a few more SFP+ ports but by then hopefully there will be something new. There is an 8 port SPF+ router but we also need some with Ethernet cables as well. Also 10GbE ports would be nice too. ----- Original Message ----- From: "Stefan Englhardt" <[email protected]> To: "af" <[email protected]> Sent: Thursday, October 6, 2016 3:01:48 AM Subject: Re: [AFMUG] suggestions for WISP headend Mikrotik We are happy with CCR1036-8G-2S+EM. In a redundant scenario you could connect 2 with a 10G SFP+ direct attach cable and there is one 10G Port left. Lot of power for VPLS concentrator or PPPOE Server. We use 2 of them for BGP Uplink. Another concentrates VPLS Tunnels and does PPPOE. Von: Af [mailto:[email protected]] Im Auftrag von Erich Kaiser Gesendet: Donnerstag, 6. Oktober 2016 02:26 An: [email protected] Betreff: [AFMUG] suggestions for WISP headend Mikrotik I have a couple guys wanting to put headend routers in our colo at Cermak, just wondering what guys are using in relation to hardware for Mikrotik? Several 1G ports with option for 10G. I know they can go x86, but want to know what is the best hardware for this? Thanks! Erich Kaiser The Fusion Network [email protected] <mailto:[email protected]> Office: 630-621-4804 Cell: 630-777-9291
