If the interference is on the subscriber end, it should affect the
downstream traffic. Interference on the AP side (which you don't seem to
be having) would affect he upstream.
Something else is going on.
bp
<part15sbs{at}gmail{dot}com>
On 10/28/2016 1:02 PM, Nate Burke wrote:
So the EPMP2000 with beam steering on the upstream side. If you have
a customer that is in line with the source of the Interference,
they're still hosed right? The AP still wont' be able to hear them
over the noise.
I have a EPMP sector with a single customer on it and the AP is
running about -50 noise across the entire band (5.1 and 5.7) I think
the source of the interference is a close by corporate campus that's
probably flooded with 5ghz wifi, and this customer is directly in
between the tower and the campus. I can only get MCS level 1 on the
upstream side with a receive level of -48. EPMP2000 would have no
effect in this scenario, right?
