For those not in our area... {S welcome
The receive beam forming wouldn't help (other than mitigating some of the
interference), but it does have active out of channel filtering like the
airPrism, so that should help as well. Not significantly, mind you, but some.
-----
Mike Hammett
Intelligent Computing Solutions
Midwest Internet Exchange
The Brothers WISP
----- Original Message -----
From: "Nate Burke" <[email protected]>
To: "Animal Farm" <[email protected]>
Sent: Friday, October 28, 2016 3:02:36 PM
Subject: [AFMUG] Theoretical EPMP2000 Question
So the EPMP2000 with beam steering on the upstream side. If you have a
customer that is in line with the source of the Interference, they're
still hosed right? The AP still wont' be able to hear them over the noise.
I have a EPMP sector with a single customer on it and the AP is running
about -50 noise across the entire band (5.1 and 5.7) I think the source
of the interference is a close by corporate campus that's probably
flooded with 5ghz wifi, and this customer is directly in between the
tower and the campus. I can only get MCS level 1 on the upstream side
with a receive level of -48. EPMP2000 would have no effect in this
scenario, right?
