If you can Diablo gigabit in the adapter autonegotian properties and only auto up to 100
On Nov 5, 2016 9:37 PM, "Jaime Solorza" <[email protected]> wrote: > It's a conspiracy > > On Nov 5, 2016 8:34 PM, "Chuck McCown" <[email protected]> wrote: > >> Arp is not showing anything other than this computer. >> >> *From:* Jaime Solorza >> *Sent:* Saturday, November 05, 2016 7:35 PM >> *To:* Animal Farm >> *Subject:* Re: [AFMUG] Have lost my marbles >> >> >> When in doubt, arp >> >> On Nov 5, 2016 6:47 PM, "Chuck McCown" <[email protected]> wrote: >> >>> Had the interface hard coded to 192.168.0.100 subnet 255.255.255.0 >>> No joy. Got tired and took the laptop home. >>> Fired it up to check email (had to turn on the wireless adapter). >>> OK fine, working. >>> >>> Checked the interface settings and they are all gone and it is set to >>> DHCP... >>> >>> Tomorrow when I plug this thing back into ethernet, I wonder if my 192 >>> address is going to magically appear. >>> >>> Something odd for certain. >>> >>> *From:* Mathew Howard >>> *Sent:* Saturday, November 05, 2016 4:47 PM >>> *To:* af >>> *Subject:* Re: [AFMUG] Have lost my marbles >>> >>> You can always get to ePMP's on 169.254.1.1 - might be worth trying that. >>> >>> On Sat, Nov 5, 2016 at 5:14 PM, <[email protected]> wrote: >>> >>>> That is what I was doing. No IP talking going on. Almost as if the >>>> laptop is not running the subnet mask. >>>> >>>> *From:* CBB - Jay Fuller >>>> *Sent:* Saturday, November 5, 2016 1:04 PM >>>> *To:* [email protected] >>>> *Subject:* Re: [AFMUG] Have lost my marbles >>>> >>>> >>>> i think i would try to isolate one piece of equipment at a time >>>> can you talk to the netonix and nothing else? (connected directly) >>>> can you talk to the epmp and nothing else? (connected directly) >>>> >>>> check the netonix to make sure in system settings it does not restrict >>>> access coming from only >>>> one subnet. in fact, i think we had that problem as well and that was >>>> what i had to uncheck to be >>>> able to access it. >>>> >>>> good luck! lunchtime! >>>> >>>> war eagle! >>>> >>>> >>>> >>>> ----- Original Message ----- >>>> *From:* Chuck McCown >>>> *To:* [email protected] >>>> *Sent:* Saturday, November 05, 2016 1:47 PM >>>> *Subject:* Re: [AFMUG] Have lost my marbles >>>> >>>> Hooked up to lan, reconfigured IP settings, can talk to the world. >>>> This email is from the laptop. >>>> So, it has to be something dumb in the IP settings... >>>> >>>> I note netonix says to https and cambium is http. >>>> But more basic than that, I cannot ping 192.168.x.x >>>> >>>> Arrgh.. >>>> >>>> *From:* [email protected] >>>> *Sent:* Saturday, November 05, 2016 12:31 PM >>>> *To:* [email protected] >>>> *Subject:* [AFMUG] Have lost my marbles >>>> >>>> Trying to configure a Netonix switch and an epmp 2000. >>>> Dell Laptop. W10 >>>> >>>> getmac shows that the radio is present, so I presume that means my >>>> interface on the computer is functional. >>>> eth lights on the radio and switch both light. >>>> >>>> 192.168.0.100 - 255.255.255.0 is the laptop (took out everything else). >>>> >>>> Tried 255.255.0.0 mask >>>> >>>> Tried 192.168.1.10 address to talk to netonix at 192.168.1.20 >>>> >>>> No pings, no arp, no browsing etc. >>>> Tried different cables, power supplies etc. >>>> >>>> Gotta be something really silly. Or I have blown up my ethernet >>>> interface. >>>> I have to believe it is a user error... Something really basic. >>>> >>>> At some point I am going to have to connect that laptop to the lan to >>>> verify it can still talk to the world. But I am sure I must be >>>> misconfiguring something. I am sure nobody messed with the IPs of the >>>> radio and switch. >>>> >>>> >>> >>
