AFAIK there is no way in EPMP to do that, but it is on the roadmap ala
FSK and 450.
On 11/9/2016 12:05 PM, Paul McCall wrote:
Yep, I get know that my expectation for going from a Mikrotik probably
isn�t going to work.
What device do we use to talk to an SM via MAC Telnet ? Not seeing an
option within the AP to do it from there.
Paul
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Nate Burke
*Sent:* Wednesday, November 9, 2016 12:52 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] MAC Telnet on ePMP 3.1
Are you talking about trying to login via MAC telnet?� The Neighbor
list is just everything that is spitting out Discovery info, ala CDP
or UBNT discovery, you can see all your cisco or UBNT devices in a
mikrotik neighbor list, but you can't login at a MAC level to them.�
It is just a tool to see layer 2 connected devices IP Address, name, etc.
From http://wiki.mikrotik.com/wiki/MAC_access� "MAC telnet is
possible between two MikroTik RouterOS routers only. "
�
On 11/9/2016 11:42 AM, Paul McCall wrote:
Can you expand on this?� How do we login then?� From what
device?� I guess I was assuming we could from a Tik, but maybe
there is something else in mind?� I don�t see an option from
Cambium?
�
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Nate Burke
*Sent:* Wednesday, November 9, 2016 9:42 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] MAC Telnet on ePMP 3.1
�
I think the user/password is done locally before any communication
is done with the remote device.� I know that when I have a Tik
that is locked up, but still showing in the neighbor list,
mactelnet will always ask user/pass, but then fail when trying to
connect.�
I always through mac-telnet was Tik proprietary.�
On 11/9/2016 8:03 AM, Paul McCall wrote:
Installed 3.1 on 1 tower of ePMPs.� The GUI is much quicker
now.� I still wouldn�t call it fast but a huge
improvement.� Good job Cambium.
�
By default MAC-Telnet is enabled and the radios show up in IP
Neighbors on a Mikrotik.� When we trying connecting we get
challenged for Login (then password) and the normal password
for the Admin account get rejected.
�
Am I missing something?
�
Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800�
pa...@pdmnet.net <mailto:pa...@pdmnet.net>
www.pdmnet.com <http://www.pdmnet.com>
www.floridabroadband.com <http://www.floridabroadband.com>
�
�
�