I don't think I have gophers either.
Woodchucks, rats, field mice, rabbits, voles, moles...burrowing rodents
come in many flavors.
------ Original Message ------
From: "Chris Fabien" <[email protected]>
To: [email protected]
Sent: 11/17/2016 1:19:24 PM
Subject: Re: [AFMUG] Fiber Cost
If you have gophers and duct prevents that I suppose that's worth the
cost.
We do not have gophers in Michigan. We put everything direct buried in
rural areas. In some cases we may plow in 12ct cable down a mile of
road with only a few obstacles that need to be bored. That's about
$1000 of cable. A mile of innerduct is about $2000 in material and is a
big product to plow if you're plowing, or has to be drilled in (more
expensive).
In town we run duct, mainly because there are enough obstacles that we
have to drill it all anyway. There are certainly benefits to duct, but
it adds a lot of cost when you're looking at a rural area with maybe 10
houses per mile. Just my opinion, worth what you paid for it!
Chris Fabien
LakeNet LLC
On Thu, Nov 17, 2016 at 11:05 AM, Chuck McCown <[email protected]> wrote:
I would never do direct again. Gopher damage. Doesn’t happen with
duct.
Plus with duct you can cut and pull out and go over and under anytime
you want. Saves in splicing and figure 8 ing etc.
Duct is worth the extra expense. And it is not really that expensive.
From:Mark Radabaugh
Sent: Thursday, November 17, 2016 6:14 AM
To:[email protected]
Subject: Re: [AFMUG] Fiber Cost
Duct or direct plow makes a difference. Direct is cheaper but damage
is much harder, takes longer to repair, and increases your maintenance
cost over time. With direct bury you have no ability to pull slack or
add new handholes for access. In the event of a fiber cut without
duct the repair usually involves exposing 100’ of cable on either side
of the damage and splicing in a new section of cable which will
require double the number of splices and splice cases versus duct
where you can pull spare cable in.
Mark
On Nov 17, 2016, at 8:03 AM, Lewis Bergman <[email protected]>
wrote:
All ROW are already in place. Few road crossings in rural areas but
in cities close to standard numbers of road crossings.
On Thu, Nov 17, 2016, 6:53 AM <[email protected]> wrote:
Just don't forget that there will be costs not related to
construction both before and after.
Some of them are onetime costs, not related to mileage like
planning, permits and the like. This is one reason costs are all
over the map, because it depends on how many miles you can spread
fixed prebuild costs.
Others are ongoing costs which will keep eating at you, even after
you finish construction. Various reporting requirements and
paperwork, locates, repairs, maintenance, etc. Even when you have a
brand new plant you have to budget for OPEX.
Jared
> Sent: Thursday, November 17, 2016 at 2:27 PM
> From: "Mark Radabaugh" <[email protected]>
> To: [email protected]
> Subject: Re: [AFMUG] Fiber Cost
>
> All over the place. 10k to 200k depending location. Rural
direct plowed in good soil with no duct and nothing in the way?
12k is about as low as I have seen quoted. Road crossings,
boring, rock, urban, rail crossings, pipeline crossings will all add
to that number.
>
> Mark
>
>
> > On Nov 17, 2016, at 5:52 AM, Lewis Bergman
<[email protected]> wrote:
> >
> > I know we have discussed this before but I wanted a current cost
for backhaul fiber per mile in the ground.
>
>
