We have RadioWaves HP2 and HP3s' in a couple flavors. HPx-11R, Remec
round for Trango ApexPlus and HPx-11EX, for Exalt G2. Then we have
Trango AD11G2-S2's and 3-S2's for ApexPlus, Remec round. So obviously we
wouldn't be able to do the feedhorn swap on those.
The RadioWaves 11EX are single-pol only, so those would need the
feedhorn swapped. But the 11R is where it makes sense for the Remec
adapter plate, especially in the case of the Trango dishes.
So for me it would come down to $250-300? for the adapter plate vs $400?
for a new RW feedhorn vs $1k for a whole new dish.
This would probably be half as difficult if UBNT would've designed for
waveguide, IMO.
On 11/18/2016 2:13 PM, Brad Belton wrote:
Right, I see the RadioWaves DP N-Type feed, but we�re looking/hoping
someone comes out with a REMEC round to DP N-Type adapter.
Quicker, cheaper than replacing the feed horn and could be used on any
antenna with a REMEC round feed horn�not just a RadioWaves antenna.
Brad
*From:*[email protected] [mailto:[email protected]]
*On Behalf Of *Mike Hammett
*Sent:* Friday, November 18, 2016 2:08 PM
*To:* [email protected]
*Subject:* Re: [WISPA Members] Who will have AF-11X First?
Non-UBNT licensed dish to N connectors and radio mount.
-----
Mike Hammett
Intelligent Computing Solutions <http://www.ics-il.com/>
<https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>
Midwest Internet Exchange <http://www.midwest-ix.com/>
<https://www.facebook.com/mdwestix><https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
The Brothers WISP <http://www.thebrotherswisp.com/>
<https://www.facebook.com/thebrotherswisp><https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
------------------------------------------------------------------------
*From: *"Brad Belton" <[email protected] <mailto:[email protected]>>
*To: *[email protected] <mailto:[email protected]>
*Sent: *Friday, November 18, 2016 2:06:47 PM
*Subject: *Re: [WISPA Members] Who will have AF-11X First?
So, what are we looking for? SFP port?
I don�t see any REMEC round to dual polarity N-Type adapters in your
pictures! <grin>
Brad
*From:*[email protected] <mailto:[email protected]>
[mailto:[email protected]] *On Behalf Of *Mike Hammett
*Sent:* Friday, November 18, 2016 2:02 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [WISPA Members] Who will have AF-11X First?
https://www.facebook.com/thebrotherswisp/photos/a.997555730369879.1073741834.186874744771319/997557797036339/?type=3&theater
-----
Mike Hammett
Intelligent Computing Solutions <http://www.ics-il.com/>
<https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>
Midwest Internet Exchange <http://www.midwest-ix.com/>
<https://www.facebook.com/mdwestix><https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
The Brothers WISP <http://www.thebrotherswisp.com/>
<https://www.facebook.com/thebrotherswisp><https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
------------------------------------------------------------------------
*From: *"Brad Belton" <[email protected] <mailto:[email protected]>>
*To: *[email protected] <mailto:[email protected]>
*Sent: *Friday, November 18, 2016 10:09:25 AM
*Subject: *Re: [WISPA Members] Who will have AF-11X First?
You'll need to order a new feed horn for your RadioWaves antenna. I don't
have the SKUs yet, but I'm hearing they might be shipping by end of the
month or early next. They are basically a standard dual polarity N-Type
feed horn except the feed horn "kit" also comes with a UBNT specific
mounting bracket for the radio.
I wish there was a REMEC round to dual polarity N-Type adapter available.
Sure would be easier than a feed horn swap...and likely less expensive
too.
I've got a call into Pasternack to see if such an adapter is even
feasible.
I'm thinking it is, but would depend on demand.
Brad
-----Original Message-----
From: [email protected] <mailto:[email protected]>
[mailto:[email protected]] On Behalf
Of Keefe John
Sent: Friday, November 18, 2016 9:59 AM
To: [email protected] <mailto:[email protected]>
Subject: Re: [WISPA Members] Who will have AF-11X First?
What was on the dish you had before? Can I make these work on a a
Radiowaves Dragonwave dish?
On 11/17/2016 8:54 PM, Brad Belton wrote:
> DoubleRadius should have them. Our AF-11X order filled, but waiting on
new
> RadioWaves dual polarity feed horns before they can be put to use.
>
> Brad
>
> -----Original Message-----
> From: [email protected] <mailto:[email protected]>
[mailto:[email protected]] On
Behalf
> Of Keefe John
> Sent: Thursday, November 17, 2016 7:17 PM
> To: [email protected] <mailto:[email protected]>
> Subject: [WISPA Members] Who will have AF-11X First?
>
> Which distributors will have AF-11X first? Does anyone have ETAs?
>
> Keefe
>
> _______________________________________________
> Members mailing list
> [email protected] <mailto:[email protected]>
> http://lists.wispa.org/mailman/listinfo/members
>
> _______________________________________________
> Members mailing list
> [email protected] <mailto:[email protected]>
> http://lists.wispa.org/mailman/listinfo/members
_______________________________________________
Members mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/members
_______________________________________________
Members mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/members
_______________________________________________
Members mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/members
_______________________________________________
Members mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/members
