They are designing for a lot of different mounting options, but they have to hit the ones that are the easiest sells out the gate.
Stay tuned. On Nov 18, 2016 5:44 PM, "George Skorup" <[email protected]> wrote: > We have RadioWaves HP2 and HP3s' in a couple flavors. HPx-11R, Remec round > for Trango ApexPlus and HPx-11EX, for Exalt G2. Then we have Trango > AD11G2-S2's and 3-S2's for ApexPlus, Remec round. So obviously we wouldn't > be able to do the feedhorn swap on those. > > The RadioWaves 11EX are single-pol only, so those would need the feedhorn > swapped. But the 11R is where it makes sense for the Remec adapter plate, > especially in the case of the Trango dishes. > > So for me it would come down to $250-300? for the adapter plate vs $400? > for a new RW feedhorn vs $1k for a whole new dish. > > This would probably be half as difficult if UBNT would've designed for > waveguide, IMO. > > On 11/18/2016 2:13 PM, Brad Belton wrote: > > Right, I see the RadioWaves DP N-Type feed, but we�re looking/hoping > someone comes out with a REMEC round to DP N-Type adapter.� > > � > > Quicker, cheaper than replacing the feed horn and could be used on any > antenna with a REMEC round feed horn�not just a RadioWaves antenna. > > � > > Brad > > � > > *From:* [email protected] [mailto:[email protected] > <[email protected]>] *On Behalf Of *Mike Hammett > *Sent:* Friday, November 18, 2016 2:08 PM > *To:* [email protected] > *Subject:* Re: [WISPA Members] Who will have AF-11X First? > > � > > Non-UBNT licensed dish to N connectors and radio mount. > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > > *From: *"Brad Belton" <[email protected]> > *To: *[email protected] > *Sent: *Friday, November 18, 2016 2:06:47 PM > *Subject: *Re: [WISPA Members] Who will have AF-11X First? > > So, what are we looking for?� SFP port? > > � > > I don�t see any REMEC round to dual polarity N-Type adapters in your > pictures!� <grin> > > � > > Brad > > � > > *From:* [email protected] [mailto:[email protected] > <[email protected]>] *On Behalf Of *Mike Hammett > *Sent:* Friday, November 18, 2016 2:02 PM > *To:* [email protected] > *Subject:* Re: [WISPA Members] Who will have AF-11X First? > > � > > https://www.facebook.com/thebrotherswisp/photos/a. > 997555730369879.1073741834.186874744771319/997557797036339/?type=3&theater > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > > *From: *"Brad Belton" <[email protected]> > *To: *[email protected] > *Sent: *Friday, November 18, 2016 10:09:25 AM > *Subject: *Re: [WISPA Members] Who will have AF-11X First? > > You'll need to order a new feed horn for your RadioWaves antenna. �I > don't > have the SKUs yet, but I'm hearing they might be shipping by end of the > month or early next. �They are basically a standard dual polarity N-Type > feed horn except the feed horn "kit" also comes with a UBNT specific > mounting bracket for the radio. > > I wish there was a REMEC round to dual polarity N-Type adapter available. > Sure would be easier than a feed horn swap...and likely less expensive too. > I've got a call into Pasternack to see if such an adapter is even feasible. > I'm thinking it is, but would depend on demand. > > Brad > > � > > -----Original Message----- > From: [email protected] [mailto:[email protected] > <[email protected]>] On Behalf > Of Keefe John > Sent: Friday, November 18, 2016 9:59 AM > To: [email protected] > Subject: Re: [WISPA Members] Who will have AF-11X First? > > What was on the dish you had before? �Can I make these work on a a > Radiowaves Dragonwave dish? > > > On 11/17/2016 8:54 PM, Brad Belton wrote: > > DoubleRadius should have them. �Our AF-11X order filled, but waiting on > new > > RadioWaves dual polarity feed horns before they can be put to use. > > > > Brad > > > > -----Original Message----- > > From: [email protected] [mailto:[email protected] > <[email protected]>] On > Behalf > > Of Keefe John > > Sent: Thursday, November 17, 2016 7:17 PM > > To: [email protected] > > Subject: [WISPA Members] Who will have AF-11X First? > > > > Which distributors will have AF-11X first? �Does anyone have ETAs? > > > > Keefe > > > > _______________________________________________ > > Members mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/members > > > > _______________________________________________ > > Members mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/members > > _______________________________________________ > Members mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/members > > _______________________________________________ > Members mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/members > > � > > > _______________________________________________ > Members mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/members > > � > > > _______________________________________________ > Members mailing > [email protected]http://lists.wispa.org/mailman/listinfo/members > > >
