this isnt my usual asshole distrust of UBNT, I know UBNT chuck is behind it, so its solid gear, but are people really ready to put their faith in the limited and $$$ spectrum on UBNT?
On Fri, Nov 18, 2016 at 6:18 PM, Josh Reynolds <[email protected]> wrote: > They are designing for a lot of different mounting options, but they have > to hit the ones that are the easiest sells out the gate. > > Stay tuned. > > On Nov 18, 2016 5:44 PM, "George Skorup" <[email protected]> wrote: > >> We have RadioWaves HP2 and HP3s' in a couple flavors. HPx-11R, Remec >> round for Trango ApexPlus and HPx-11EX, for Exalt G2. Then we have Trango >> AD11G2-S2's and 3-S2's for ApexPlus, Remec round. So obviously we wouldn't >> be able to do the feedhorn swap on those. >> >> The RadioWaves 11EX are single-pol only, so those would need the feedhorn >> swapped. But the 11R is where it makes sense for the Remec adapter plate, >> especially in the case of the Trango dishes. >> >> So for me it would come down to $250-300? for the adapter plate vs $400? >> for a new RW feedhorn vs $1k for a whole new dish. >> >> This would probably be half as difficult if UBNT would've designed for >> waveguide, IMO. >> >> On 11/18/2016 2:13 PM, Brad Belton wrote: >> >> Right, I see the RadioWaves DP N-Type feed, but we�re looking/hoping >> someone comes out with a REMEC round to DP N-Type adapter.� >> >> � >> >> Quicker, cheaper than replacing the feed horn and could be used on any >> antenna with a REMEC round feed horn�not just a RadioWaves antenna. >> >> � >> >> Brad >> >> � >> >> *From:* [email protected] [mailto:[email protected] >> <[email protected]>] *On Behalf Of *Mike Hammett >> *Sent:* Friday, November 18, 2016 2:08 PM >> *To:* [email protected] >> *Subject:* Re: [WISPA Members] Who will have AF-11X First? >> >> � >> >> Non-UBNT licensed dish to N connectors and radio mount. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions <http://www.ics-il.com/> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> Midwest Internet Exchange <http://www.midwest-ix.com/> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> The Brothers WISP <http://www.thebrotherswisp.com/> >> <https://www.facebook.com/thebrotherswisp> >> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >> ------------------------------ >> >> *From: *"Brad Belton" <[email protected]> >> *To: *[email protected] >> *Sent: *Friday, November 18, 2016 2:06:47 PM >> *Subject: *Re: [WISPA Members] Who will have AF-11X First? >> >> So, what are we looking for?� SFP port? >> >> � >> >> I don�t see any REMEC round to dual polarity N-Type adapters in your >> pictures!� <grin> >> >> � >> >> Brad >> >> � >> >> *From:* [email protected] [mailto:[email protected] >> <[email protected]>] *On Behalf Of *Mike Hammett >> *Sent:* Friday, November 18, 2016 2:02 PM >> *To:* [email protected] >> *Subject:* Re: [WISPA Members] Who will have AF-11X First? >> >> � >> >> https://www.facebook.com/thebrotherswisp/photos/a.9975557303 >> 69879.1073741834.186874744771319/997557797036339/?type=3&theater >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions <http://www.ics-il.com/> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> Midwest Internet Exchange <http://www.midwest-ix.com/> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> The Brothers WISP <http://www.thebrotherswisp.com/> >> <https://www.facebook.com/thebrotherswisp> >> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >> ------------------------------ >> >> *From: *"Brad Belton" <[email protected]> >> *To: *[email protected] >> *Sent: *Friday, November 18, 2016 10:09:25 AM >> *Subject: *Re: [WISPA Members] Who will have AF-11X First? >> >> You'll need to order a new feed horn for your RadioWaves antenna. �I >> don't >> have the SKUs yet, but I'm hearing they might be shipping by end of the >> month or early next. �They are basically a standard dual polarity N-Type >> feed horn except the feed horn "kit" also comes with a UBNT specific >> mounting bracket for the radio. >> >> I wish there was a REMEC round to dual polarity N-Type adapter available. >> Sure would be easier than a feed horn swap...and likely less expensive >> too. >> I've got a call into Pasternack to see if such an adapter is even >> feasible. >> I'm thinking it is, but would depend on demand. >> >> Brad >> >> � >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected] >> <[email protected]>] On Behalf >> Of Keefe John >> Sent: Friday, November 18, 2016 9:59 AM >> To: [email protected] >> Subject: Re: [WISPA Members] Who will have AF-11X First? >> >> What was on the dish you had before? �Can I make these work on a a >> Radiowaves Dragonwave dish? >> >> >> On 11/17/2016 8:54 PM, Brad Belton wrote: >> > DoubleRadius should have them. �Our AF-11X order filled, but waiting >> on >> new >> > RadioWaves dual polarity feed horns before they can be put to use. >> > >> > Brad >> > >> > -----Original Message----- >> > From: [email protected] [mailto:[email protected] >> <[email protected]>] On >> Behalf >> > Of Keefe John >> > Sent: Thursday, November 17, 2016 7:17 PM >> > To: [email protected] >> > Subject: [WISPA Members] Who will have AF-11X First? >> > >> > Which distributors will have AF-11X first? �Does anyone have ETAs? >> > >> > Keefe >> > >> > _______________________________________________ >> > Members mailing list >> > [email protected] >> > http://lists.wispa.org/mailman/listinfo/members >> > >> > _______________________________________________ >> > Members mailing list >> > [email protected] >> > http://lists.wispa.org/mailman/listinfo/members >> >> _______________________________________________ >> Members mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/members >> >> _______________________________________________ >> Members mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/members >> >> � >> >> >> _______________________________________________ >> Members mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/members >> >> � >> >> >> _______________________________________________ >> Members mailing >> [email protected]http://lists.wispa.org/mailman/listinfo/members >> >> >> -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
