The thread actually says Mikrotik can't do what I'm trying to
do...unless I'm missing something. Mikrotik can connect a telnet or ssh
session to it's serial port, or it can connect the serial port to an
emulated serial port on a PC.
What I have is a machine with a serial connection to a control panel,
and I want to move the control panel to a remote location.
------ Original Message ------
From: "Faisal Imtiaz" <[email protected]>
To: [email protected]
Sent: 11/22/2016 9:20:27 PM
Subject: Re: [AFMUG] Serial over IP
http://forum.mikrotik.com/viewtopic.php?t=29185
Regards
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: [email protected]
--------------------------------------------------------------------------------
From: "Adam Moffett" <[email protected]>
To: [email protected]
Sent: Tuesday, November 22, 2016 6:06:17 PM
Subject: Re: [AFMUG] Serial over IP
Could I somehow tunnel the serial connection from the device to the
control panel with Mikrotik? There's no PC in the mix, just a serial
DCE to a DTE. If a pair of Mikrotiks could do this, that would save
me the trouble of buying something.
------ Original Message ------
From: "Trey Scarborough" <[email protected]>
To: [email protected]
Sent: 11/22/2016 6:01:21 PM
Subject: Re: [AFMUG] Serial over IP
You can always use to mikrotik boards with serial interfaces or usb
serial. Works quite well.
On 11/22/2016 1:16 PM, Adam Moffett wrote:
If I want to extend an RS232 connection over IP, what sort of
options do I have?
It's for an LCD control panel for a piece of equipment. Google
shows me lots of serial-IP servers where it bridges a telnet session
to the serial port, but that's not what I'm looking for. I know you
industrial control guys do this, so I'm sure there's a way.
