Not sure if these came up yet but we use them all the time:
http://connections.advantech-bb.com/search?w=ethernet%20to%20serial%20converter
On 11/23/2016 10:28 AM, Adam Moffett wrote:
The thread actually says Mikrotik can't do what I'm trying to
do...unless I'm missing something. Mikrotik can connect a telnet or
ssh session to it's serial port, or it can connect the serial port to
an emulated serial port on a PC.
What I have is a machine with a serial connection to a control panel,
and I want to move the control panel to a remote location.
------ Original Message ------
From: "Faisal Imtiaz" <[email protected]
<mailto:[email protected]>>
To: [email protected] <mailto:[email protected]>
Sent: 11/22/2016 9:20:27 PM
Subject: Re: [AFMUG] Serial over IP
http://forum.mikrotik.com/viewtopic.php?t=29185
Regards
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: [email protected]
<mailto:[email protected]>
------------------------------------------------------------------------
*From: *"Adam Moffett" <[email protected]
<mailto:[email protected]>>
*To: *[email protected] <mailto:[email protected]>
*Sent: *Tuesday, November 22, 2016 6:06:17 PM
*Subject: *Re: [AFMUG] Serial over IP
Could I somehow tunnel the serial connection from the device to
the control panel with Mikrotik? There's no PC in the mix, just a
serial DCE to a DTE. If a pair of Mikrotiks could do this, that
would save me the trouble of buying something.
------ Original Message ------
From: "Trey Scarborough" <[email protected] <mailto:[email protected]>>
To: [email protected] <mailto:[email protected]>
Sent: 11/22/2016 6:01:21 PM
Subject: Re: [AFMUG] Serial over IP
You can always use to mikrotik boards with serial interfaces
or usb serial. Works quite well.
On 11/22/2016 1:16 PM, Adam Moffett wrote:
If I want to extend an RS232 connection over IP, what
sort of options do I have?
It's for an LCD control panel for a piece of
equipment. Google shows me lots of serial-IP servers
where it bridges a telnet session to the serial port, but
that's not what I'm looking for. I know you industrial
control guys do this, so I'm sure there's a way.
