Uhhmm...you're probably going to have DFS issues on 3.x
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jan 4, 2017 at 3:03 PM, George Skorup <[email protected]> wrote: > Nope. P9 5.7 APs do not support SM Tx power control. We're just going to > go to an ePMP 2000 AP and pray that we don't have DFS issues on 3.x. > > On 1/4/2017 1:37 PM, Dave wrote: > > FSK is going to be hard to colo due to the fact you mentioned but you > should be able to upgrade to fsk latest FW and > get what u need for ATPC > Also, Look at you epmp for latest FW for it to also have some more control > over ATPC > You also may need to adj the level at which the ATPC will adjust to. > Being that close I would set it lower from -57 to more like -67 or so and > do the same for both fsk and epmp. > > > > On 01/03/2017 02:44 PM, George Skorup wrote: > > First time I've tried this. I have a site with two 5750APs. They are quite > obviously overloading the receiver on the ePMP GPS AP. Put numbers in the > co-lo spreadsheet, timing checks out. Running the ePMP in the 5.4 band. > Still works for shit. > > This is a very compact micro-pop, so we have SMs within 50-100 feet of the > tower. I'm betting the SM uplinks are interfering with the ePMP AP. And I > get no SM Tx power control on the Canopy's because the APs are P9's. > Probably gonna have to go to an ePMP 2000 AP. Ugh. I would put 450 there, > but the boss said no, the SMs are too expensive. > > > -- > > >
