Thanks, that explains a lot. So the controller exists. And it can go side-by-side with an injector.
And thats quite a honkin heat sink. So its more than 1U high. Do you think it generates regulated 56V (or 29.5V for the other version) from 48V in? If not, why the big heat sink? To be able to power 450m? From: Af [mailto:[email protected]] On Behalf Of Dave Sent: Tuesday, January 10, 2017 5:13 PM To: Animal Farm <[email protected]> Subject: [AFMUG] 450m see attached.. �they are a bit pricey but no more than a CTM2 fully loaded. The difference is support for the 450m and other 450i devices as well as its modular some site may not need more than 4 control points some of mine require 12 or more but those are sitting on cmm4s with only hopes of ever reaching 100Mb port speed. I will be able to add to this design without buying a whole ctm2 or cmm4 just one module at a time. So, there is some money saved by this design for new deployments. The cambium gige Surge or lpu� depending on which radio I am using will get an external protection near the radio. Depending on cable runs we will add one near the entry ports. -------- Forwarded Message -------- Date: Tue, 10 Jan 2017 17:06:13 -0600 From: Dave <mailto:[email protected]> <[email protected]> To: davidm <mailto:[email protected]> <[email protected]> Sent with AquaMail for Android http://www.aqua-mail.com
