Thats how much of a data packet is overhead. It's opposite what you would think 
with header compression capability.

Jon Langeler
Michwave Technologies, Inc.


> On Feb 15, 2017, at 5:52 PM, Josh Reynolds <[email protected]> wrote:
> 
> Assume the endpoints are the same and that header compression is equally 
> effective on both packet sizes.
> 
> Now explain how smaller packets are more efficient.
> 
> On Feb 15, 2017 12:05 PM, "Mike Hammett" <[email protected]> wrote:
> You're forgetting about the header compression.
> 
> 
> 
> 
> -----
> Mike Hammett
> Intelligent Computing Solutions
> 
> Midwest Internet Exchange
> 
> The Brothers WISP
> 
> 
> 
> 
> From: "Josh Reynolds" <[email protected]>
> To: [email protected]
> Sent: Wednesday, February 15, 2017 10:41:45 AM
> 
> Subject: Re: [AFMUG] 18GHz licensed
> 
> Huh? More packets = more overhead. Less packets = less overhead.
> 
>> On Feb 15, 2017 10:37 AM, "Jon Langeler" <[email protected]> wrote:
> 
>> I think you have those numbers flipped. It does more speed with small 
>> packets.
>> 
>> Jon Langeler
>> Michwave Technologies, Inc.
>> 
>> 
>> On Feb 15, 2017, at 10:41 AM, Jeremy <[email protected]> wrote:
>> 
>> At 1024QAM it does 761Mbps LG packets and 486Mbps SM packets.  When I ran 
>> TCP speed tests on the link I got 750Mbps though.  
>> 
>>> On Wed, Feb 15, 2017 at 8:40 AM, Jeremy <[email protected]> wrote:
>>> No, it is 1024.
>>> 
>>>> On Wed, Feb 15, 2017 at 8:25 AM, Josh Luthman 
>>>> <[email protected]> wrote:
>>>> Is that 2048, Jeremy?
>>>> 
>>>> 
>>>> Josh Luthman
>>>> Office: 937-552-2340
>>>> Direct: 937-552-2343
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>> 
>>>>> On Wed, Feb 15, 2017 at 10:18 AM, Jeremy <[email protected]> wrote:
>>>>> Our 6GHz Trango link does 750Mbps FDX on a 60MHz channel width.
>>>>> 
>>>>>> On Wed, Feb 15, 2017 at 7:55 AM, Rory Conaway <[email protected]> 
>>>>>> wrote:
>>>>>> No but it’s the middle of Phoenix, I’d be surprised if it was. 
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> Rory
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> From: Af [mailto:[email protected]] On Behalf Of Jeff Broadwick - 
>>>>>> Lists
>>>>>> Sent: Wednesday, February 15, 2017 5:06 AM
>>>>>> 
>>>>>> 
>>>>>> To: [email protected]
>>>>>> Subject: Re: [AFMUG] 18GHz licensed
>>>>>>  
>>>>>> 
>>>>>> Did you check and see if there is a 60MHz channel available in 6GHz Rory?
>>>>>> 
>>>>>> Jeff Broadwick
>>>>>> 
>>>>>> ConVergence Technologies, Inc.
>>>>>> 
>>>>>> 312-205-2519 Office
>>>>>> 
>>>>>> 574-220-7826 Cell
>>>>>> 
>>>>>> [email protected]
>>>>>> 
>>>>>> 
>>>>>> On Feb 15, 2017, at 1:39 AM, Rory Conaway <[email protected]> wrote:
>>>>>> 
>>>>>> Will the Cambium 820 support that?
>>>>>> 
>>>>>> Rory
>>>>>> 
>>>>>> -----Original Message-----
>>>>>> From: Af [mailto:[email protected]] On Behalf Of George Skorup
>>>>>> Sent: Tuesday, February 14, 2017 11:25 PM
>>>>>> To: [email protected]
>>>>>> Subject: Re: [AFMUG] 18GHz licensed
>>>>>> 
>>>>>> IIRC, there are 10 channel pairs on the 40MHz channel plan for 18GHz. 
>>>>>> You could always do 2+0 if there are two channels available on your 
>>>>>> proposed path.
>>>>>> 
>>>>>> On 2/15/2017 12:06 AM, Rory Conaway wrote:
>>>>>> 
>>>>>> 
>>>>>> 12 miles.  Needs 4' dishes minimum but I didn't ask about both 
>>>>>> polarities.  Thanks.
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> Rory
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> -----Original Message-----
>>>>>> 
>>>>>> From: Af [mailto:[email protected]] On Behalf Of Trey Scarborough
>>>>>> 
>>>>>> Sent: Tuesday, February 14, 2017 10:05 PM
>>>>>> 
>>>>>> To: [email protected]
>>>>>> 
>>>>>> Subject: Re: [AFMUG] 18GHz licensed
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> Hmm Xpic if you can get 40mhz on H and V. are you trying to make this
>>>>>> 
>>>>>> go
>>>>>> 
>>>>>> 30 miles though...
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> On 2/14/2017 10:17 PM, Rory Conaway wrote:
>>>>>> 
>>>>>> I have a link where only 40MHz is available.  What would my best
>>>>>> 
>>>>>> option be to get more than 500Mbps out of it?  2048QAM is limited to 
>>>>>> 347Mbps.
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> *Rory Conaway **� Triad Wireless �**CEO*
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> *4226 S. 37^th Street � Phoenix � AZ 85040*
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> *602-426-0542*
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> *[email protected] <mailto:[email protected]>*
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> *www.triadwireless.net <http://www.triadwireless.net/>*
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> * *
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> �The successful man is the one who finds out what is the matter
>>>>>> 
>>>>>> with his business before his competitors do.� - Roy L. Smith
>>>>>> 
> 
> 

Reply via email to