Ahh, that makes sense. I ended up blowing one of the those pulling
it out while it was powered (the screw on the green power connector
engaged slightly through vibration so I had no choice). Thanks for
sharing.
Jesse DuPont
Network
Architect
email: jesse.dup...@celeritycorp.net
Celerity Networks LLC
Celerity
Broadband LLC
Like us! facebook.com/celeritynetworksllc
Like us! facebook.com/celeritybroadband
On 3/16/17 2:12 PM, Chuck McCown wrote:
It was pointed out to me here at AnimalFarm that there is
a small part of a trace on that circuit board that will
contact the grounding lug in the shelf when being inserted
or removed. Not when fully seated.
So don’t have the green power power connector attached
when inserting or removing the card. It can be field fixed
with a small dot of fingernail polish. I will be fixing the
PCB on the next run to fix the interference.
I will replace any unit in the field with advance
replacement.
Sent: Thursday, March 16, 2017 1:07 PM
Subject: Re: [AFMUG] Atten: Chuck
800-GIGE-POE-APC RACK MOUNTPOE-POWERINSERTER/SURGE
PROTECTOR
This
works flawlessly, just put it in.
Thanks again for the help
Thank you for the info!
OK, so if you put + on the left
pin and – on the right pin, then
jumpers for 1/2 and 4/5 need to be
on the left and center pins and the
jumpers for 3/6 and 7/8 need to be
center and right pins.
Sent: Thursday,
March 02, 2017 11:53 AM
Subject: Re: [AFMUG]
Atten: Chuck 800-GIGE-POE-APC
RACK MOUNT
POE-POWERINSERTER/SURGE
PROTECTOR
Sorry,
here is the pinouts with polarity
Pin 1 +
Pin 2 +
Pin 3 -
Pin 4 +
Pin 5 +
Pin 6 -
Pin 7 -
Pin 8 -
On all 8 pins? If
so, then you slide all
the jumpers one way
and only hook up +48
to the POE inserter.
Is the –48 via chassis
ground?
Sent:
Thursday, March
02, 2017 11:30
AM
Subject:
Re: [AFMUG]
Atten: Chuck
800-GIGE-POE-APC
RACK MOUNT POE
-POWERINSERTER/SURGE
PROTECTOR
Excellent!
The polarity is
+48vdc.
I would
say yes, but
that document
does not
indicate the
DC power
polarity of
the pairs. So
yes, provided
the jumpers on
the POE are
set right.
Can
anyone in
Exalt tech
support give
you the
polarity info?
Sent:
Thursday,
March 02, 2017
10:55 AM
Subject:
[AFMUG] Atten:
Chuck
800-GIGE-POE-APC
RACK MOUNT POE
-
POWERINSERTER/SURGE
PROTECTOR
Chuck,
do you know if
the
800-GIGE-POE-APC
will work to
power up a
Exalt
ExtremeAir
radio?
We are being
told that the
DC power
supplies won’t
be available
until June.
Chuck,
do you know if
the
800-GIGE-POE-APC
will work to
power up a
Exalt
ExtremeAir
radio?
We are being
told that the
DC power
supplies won’t
be available
until June.
|