The PowerInjector+Sync, the regular GigE 4 & 8 port injector as well as
the single port GigE injector will all do 2A using 4-pair powering. 2
pairs +, 2 pairs -, 1A per pair = 2A forward, 2A return.
On 3/23/2017 2:18 PM, SmarterBroadband wrote:
Yea only one. 450M spec sheet says 80 Watts!!! Hence this 100 watt POE.
I need to see if any of the Packetflux power injectors will support 2
amps per channel.
Adam
*From:*Af [mailto:[email protected]] *On Behalf Of *Bill Prince
*Sent:* Thursday, March 23, 2017 12:11 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] 450M power and Sync
That would certainly power ONE 450M. Probably not a lot more.
bp
<part15sbs{at}gmail{dot}com>
On 3/23/2017 12:08 PM, SmarterBroadband wrote:
OK SyncBox Junior works for me.
�
Would this power supply be OK?
�
http://tyconsystems.com/index.php/ac-passive-gigabit/482-tp-poe-hp-56g
�
Adam
�
*From:*Af [mailto:[email protected]] *On Behalf Of *George Skorup
*Sent:* Thursday, March 23, 2017 10:29 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 450M power and Sync
�
The 450m uses "Cambium Sync" and I still don't know what the hell
that is. AFAIK, that's only the CMM5 so far. Last Mile Gear might
support it, I don't remember.
That said, I know Sean has said that his 450m's are powered and
receiving traditional Canopy Sync from a PacketFlux
PowerInjector+Sync. Problem with that is, you're interrupting
power (the sync pulse) while trying to run a 70W load (the 450m).
Forrest said he's working on new stuff to support Cambium Sync.
Probably the best option right now is a SyncBox Junior Aux. Or a
UGPS. Enable UGPS power on the Aux port in the radio, plug it in
and go. Power the radio with whatever. GigE-POE-APC and a 56VDC/2A
supply. A PowerInjector+Sync. Or Forrest's 4-port or 8-port GigE
injector boards. Or hell, even his single-port GigE injector.
Anything that support 4-pair powering + GigE and you should be fine.
On 3/23/2017 11:51 AM, SmarterBroadband wrote:
What POE�s and Sync are people using with 450M?
�
