Yea only one. 450M spec sheet says 80 Watts!!! Hence this 100 watt POE.
I need to see if any of the Packetflux power injectors will support 2 amps per channel. Adam From: Af [mailto:[email protected]] On Behalf Of Bill Prince Sent: Thursday, March 23, 2017 12:11 PM To: [email protected] Subject: Re: [AFMUG] 450M power and Sync That would certainly power ONE 450M. Probably not a lot more. bp <part15sbs{at}gmail{dot}com> On 3/23/2017 12:08 PM, SmarterBroadband wrote: OK SyncBox Junior works for me. � Would this power supply be OK? � http://tyconsystems.com/index.php/ac-passive-gigabit/482-tp-poe-hp-56g � Adam � From: Af [mailto:[email protected]] On Behalf Of George Skorup Sent: Thursday, March 23, 2017 10:29 AM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] 450M power and Sync � The 450m uses "Cambium Sync" and I still don't know what the hell that is. AFAIK, that's only the CMM5 so far. Last Mile Gear might support it, I don't remember. That said, I know Sean has said that his 450m's are powered and receiving traditional Canopy Sync from a PacketFlux PowerInjector+Sync. Problem with that is, you're interrupting power (the sync pulse) while trying to run a 70W load (the 450m). Forrest said he's working on new stuff to support Cambium Sync. Probably the best option right now is a SyncBox Junior Aux. Or a UGPS. Enable UGPS power on the Aux port in the radio, plug it in and go. Power the radio with whatever. GigE-POE-APC and a 56VDC/2A supply. A PowerInjector+Sync. Or Forrest's 4-port or 8-port GigE injector boards. Or hell, even his single-port GigE injector. Anything that support 4-pair powering + GigE and you should be fine. On 3/23/2017 11:51 AM, SmarterBroadband wrote: What POE�s and Sync are people using with 450M? �
