Hello,
ZTE has not completed Interoperability Testing (IOT) with Ubiquiti, therefore,
their EMS and ACS will not be able to manage our ONTs, nor, is there any
guarantee that traffic will be passed.
Please feel free to contact me if you have any questions regarding ZTE IOT.
Thanks -
Parker
From: Chuck Hogg <[email protected]>
To: "[email protected]" <[email protected]>
Sent: Friday, March 31, 2017 1:21 PM
Subject: Re: [AFMUG] Small Scale PON
It works...I guess if you are looking to manage it in their platform, that
might be difficult, but all you need is a profile for it on the OLT.
Regards,
Chuck
On Fri, Mar 31, 2017 at 2:07 PM, <[email protected]> wrote:
I would not expect any random ONT to have full functionality. They might
workish... From: Jason McKemie Sent: Friday, March 31, 2017 11:56 AMTo:
[email protected] Subject: Re: [AFMUG] Small Scale PON So, other ONTs will work? The
beta store is sold out of the Ubiquiti ONTs every time I check.
On Friday, March 31, 2017, Chuck Hogg <[email protected]> wrote:
The UBNT equipment is plain GPON standard. Works on other GPON equipment.
ZTE included. Regards,
Chuck On Wed, Mar 29, 2017 at 1:24 PM, Jason McKemie
<j.mckemie@veloxinetbroadband. com> wrote:
I've got a couple reels of 3/8" steel cable. Definitely not light stuff...
On Wednesday, March 29, 2017, Adam Moffett <javascript:_e(%7B%7D,'cvml','
[email protected]');> wrote:
1/4" steel cable + drop cable + jacketing 2+2 = 7 I'm sure that's not the
bottom price, but it's not too far out of whack either. Figure-8 is also
wicked heavy. The spool weight will surprise you. ------ Original Message
------ From: "Jason McKemie" <j.mckemie@veloxinetbroadband. com> To:
"[email protected]" <[email protected]> Sent: 3/29/2017 1:01:44 PM Subject: Re: [AFMUG]
Small Scale PON
Yikes, I've bought 72 strand ADSS for less than that.
On Wednesday, March 29, 2017, Adam Moffett <[email protected]> wrote:
The most recent quote I got was $0.83/ft. It's way expensive, but no separate
messenger strand. ------ Original Message ------ From: "Jason McKemie"
<j.mckemie@veloxinetbroadband. com> To: "[email protected]" <[email protected]> Sent:
3/29/2017 11:54:27 AM Subject: Re: [AFMUG] Small Scale PON
Gotcha. What sort of pricing are you getting on the 12 strand figure-8? I've
been using ADSS up to this point since I can get closer to the neutral with it,
but figure-8 might work in some new deployment scenarios.
On Wednesday, March 29, 2017, Adam Moffett <[email protected]> wrote:
Figure-8 drop. Flat drop cable at $0.16/foot would certainly be cost
attractive, but I assumed it can't go 500' aerial....some poles are that far
apart. ------ Original Message ------ From: "Jason McKemie"
<j.mckemie@veloxinetbroadband. com> To: "[email protected]" <[email protected]> Sent:
3/29/2017 11:35:14 AM Subject: Re: [AFMUG] Small Scale PON
Were you figuring on doing this lashed or just the flat drop cable? I've got a
couple scenarios that I was looking at using 12ct flat drop, but the only way I
can think of to get it in the air is by using wedge clamps. Not sure if these
are good for the distance between some of the utility poles out there.
On Wednesday, March 29, 2017, Adam Moffett <[email protected]> wrote:
I think the idea is you can run a 12 strand aerial cable down a rural road.
Since you're using this skinny cable, you can use a $40 closure to put a PON
coupler in front of the customer prem.
My quick estimate is the difference might be around $6,000 per mile.....that
changes with assumptions on how many houses are on that mile and so on....maybe
$4k to $6k is fairer.
I don't have pricing from Calix. I'm looking at Alphion...the ONT is pretty
close to a routerboard. The OLT is a lot more than a mikrotik switch, but cost
per customer port (assuming 1:16 PON) is on par with a mid grade switch. It's
more than mikrotik, less than Juniper. I can't share numbers due to NDA, but
that's the idea.
We're looking at doing a whole rural town with 50 miles of road and 300
households. I haven't gotten down to brass tacks yet, but on the surface it
seems like the savings is enough to buy a really nice bucket truck.
-Adam
------ Original Message ------
From: "Chuck McCown" <[email protected]>
To: [email protected]
Sent: 3/27/2017 5:33:06 PM
Subject: Re: [AFMUG] Small Scale PON
Years ago, there was a break even point on active vs PON. If you had 16 or
more in an area that could take a PON it was worth doing the PON.
But that was comparing Calix AE vs Calix PON. If you do AE like Sterling I
don't think PON is ever cost effective compared to Calix PON.
With PON you still have to have a drop to each home. The cost of the cable is
in the placement, not in the cable itself.
So the question is, where do you place the splitter vs where do you place the
switch and SFPs. Personally, I would do it Sterling style on new greenfield.
The ONLY reason I do it with the expensive PON is we are a regulated common
carrier with provider of last resort obligations. I have to give POTS that is
battery backed up, legally required to do this.
Cannot risk a 911 call not going through due to a power outage etc. Cannot
trust the customer to not unplug a UPS.
-----Original Message----- From: Adam Moffett
Sent: Monday, March 27, 2017 3:11 PM
To: [email protected]
Subject: Re: [AFMUG] Small Scale PON
Yeah, so PON vs AE was actually the next research project for me to
tackle.
It seems like there ought to be savings with PON because of lower fiber
count.....lower fiber count ought to lead to smaller/cheaper enclosures.
Less junk at the head end too. I haven't gotten that far yet, but I
was thinking I might "scrimp" with PON. You're saying maybe not?
------ Original Message ------
From: "Chuck McCown" <[email protected]>
To: [email protected]
Sent: 3/27/2017 4:54:08 PM
Subject: Re: [AFMUG] Small Scale PON
I would be worried that it will go the way of some of their other ideas.
Cheap... you get what you pay for.
FTTH, I would rather pay more and know it will be solid and be around in the
years to come.
Not an area where you want to scrimp. If you want to scrimp go active ethernet.
-----Original Message----- From: Adam Moffett
Sent: Monday, March 27, 2017 12:56 PM
To: [email protected]
Subject: Re: [AFMUG] Small Scale PON
Well....I have to build with what's available today. If I delay to wait
for the next hot product, I'll always be waiting.
Besides, I honestly don't know what Ubiquiti brings to the table that
other vendors don't. I suppose it will be cost competitive, but that's
less important to me than having it just work.
-Adam
------ Original Message ------
From: "Jon Langeler" <[email protected]>
To: [email protected]
Sent: 3/27/2017 2:52:03 PM
Subject: Re: [AFMUG] Small Scale PON
With ubiquiti shipping real soon, you might want to wait
Jon Langeler
Michwave Technologies, Inc.
On Mar 27, 2017, at 2:47 PM, Adam Moffett <[email protected]> wrote:
I asked the Alphion sales rep about this. He says the optics are coded, yes.
As far as mixing ONT from one vendor with an OLT from another he said in
essence GPON is a standard, but it isn't usually tested across vendors so
whether it works fine, works with bugs, or doesn't work at all is going to be a
matter of chance.
------ Original Message ------
From: [email protected]
To: [email protected]
Sent: 3/23/2017 2:54:04 PM
Subject: Re: [AFMUG] Small Scale PON
No, generally speaking there is no crossvendor compatibility with GPON.
Jared
