Best solution would be to do fiber IMO.  SFP right into the RB.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Mon, Apr 24, 2017 at 12:32 AM, Steve Jones <[email protected]>
wrote:

> thanks man
>
> i would lock it down but i dont know whats causing it, im fearful it would
> just dump the link all together, which is fine if im on the network, but if
> im off network (as i found out the hard way tonite) my remote access to the
> shop drops and all the site routers ACLs limit access to the office IP. I
> had to VPN into a contact services customer who is on our network and then
> connect to our office so i could flip the port back on, this, btw is also
> why i hate having to have static routes on our OSPF network,
>
> On Sun, Apr 23, 2017 at 11:08 PM, Adam Moffett <[email protected]>
> wrote:
>
>> I'm 100% sure a script could do that.
>>
>> :global interfacestats
>> :global int "ether2"
>> :set interfacestats value=[/interface ethernet monitor [find name=$int]
>> as-value]
>> :if (($interfacestats->"rate")!="1000Mbps") do={/interface ethernet
>> disable [find name=$int]; :delay 3; /interface ethernet enable [find
>> name=$int]}
>>
>> That took me a strangely long time to figure out how to do because
>> Mikrotik scripts are friggin weird.   But there it is.  You could schedule
>> that every xx minutes if you wanted.
>> :delay 3; might not be necessary.  I'm not sure.
>>
>> On the other hand, what if you just disallow all auto-negotiation options
>> except for 1000/F ?
>>
>>
>> ------ Original Message ------
>> From: "Steve Jones" <[email protected]>
>> To: "[email protected]" <[email protected]>
>> Sent: 4/23/2017 10:59:17 PM
>> Subject: [AFMUG] mikrotik port monitor script
>>
>> we have a saf 11ghz primary link interconnecting our two upstream
>> locations, about once every 6 or 7 months the mikrotik renegotiates to
>> 100mbps. disable/enable the port fixes it.
>>
>> Ive never been able to reproduce it because it only happens once or twice
>> a year.
>>
>> Is there a script i can run on the mikrotik that monitors that specific
>> port and flaps it if it is ever not running 1gbps?
>>
>>
>

Reply via email to