I thought it was Fiber or Fiber + Copper?  Can't remember for sure...

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Mon, Apr 24, 2017 at 11:13 AM, Mathew Howard <[email protected]>
wrote:

> Only if you ordered the SAF with a fiber port... I'm not sure if there's
> any way they can be added if you got it with copper only. I made that
> mistake on ours... but it was a long time ago, when I didn't know any
> better (it also doesn't even cause any issue, so I don't really care, but
> still... ).
>
> On Mon, Apr 24, 2017 at 9:50 AM, Josh Luthman <[email protected]
> > wrote:
>
>> Should have a "fiber port" with their badass connector on it.  Or an SFP.
>>
>>
>> Josh Luthman
>> Office: 937-552-2340 <(937)%20552-2340>
>> Direct: 937-552-2343 <(937)%20552-2343>
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Mon, Apr 24, 2017 at 1:05 AM, Steve Jones <[email protected]>
>> wrote:
>>
>>> do i drill a hole in the saf and push the fiber in the hole and the
>>> radio mites will just make it work? :-)
>>> [image: Inline image 1]
>>>
>>>
>>> On Sun, Apr 23, 2017 at 11:57 PM, Josh Luthman <
>>> [email protected]> wrote:
>>>
>>>> Best solution would be to do fiber IMO.  SFP right into the RB.
>>>>
>>>>
>>>> Josh Luthman
>>>> Office: 937-552-2340 <(937)%20552-2340>
>>>> Direct: 937-552-2343 <(937)%20552-2343>
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>>
>>>> On Mon, Apr 24, 2017 at 12:32 AM, Steve Jones <
>>>> [email protected]> wrote:
>>>>
>>>>> thanks man
>>>>>
>>>>> i would lock it down but i dont know whats causing it, im fearful it
>>>>> would just dump the link all together, which is fine if im on the network,
>>>>> but if im off network (as i found out the hard way tonite) my remote 
>>>>> access
>>>>> to the shop drops and all the site routers ACLs limit access to the office
>>>>> IP. I had to VPN into a contact services customer who is on our network 
>>>>> and
>>>>> then connect to our office so i could flip the port back on, this, btw is
>>>>> also why i hate having to have static routes on our OSPF network,
>>>>>
>>>>> On Sun, Apr 23, 2017 at 11:08 PM, Adam Moffett <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> I'm 100% sure a script could do that.
>>>>>>
>>>>>> :global interfacestats
>>>>>> :global int "ether2"
>>>>>> :set interfacestats value=[/interface ethernet monitor [find
>>>>>> name=$int] as-value]
>>>>>> :if (($interfacestats->"rate")!="1000Mbps") do={/interface ethernet
>>>>>> disable [find name=$int]; :delay 3; /interface ethernet enable [find
>>>>>> name=$int]}
>>>>>>
>>>>>> That took me a strangely long time to figure out how to do because
>>>>>> Mikrotik scripts are friggin weird.   But there it is.  You could 
>>>>>> schedule
>>>>>> that every xx minutes if you wanted.
>>>>>> :delay 3; might not be necessary.  I'm not sure.
>>>>>>
>>>>>> On the other hand, what if you just disallow all auto-negotiation
>>>>>> options except for 1000/F ?
>>>>>>
>>>>>>
>>>>>> ------ Original Message ------
>>>>>> From: "Steve Jones" <[email protected]>
>>>>>> To: "[email protected]" <[email protected]>
>>>>>> Sent: 4/23/2017 10:59:17 PM
>>>>>> Subject: [AFMUG] mikrotik port monitor script
>>>>>>
>>>>>> we have a saf 11ghz primary link interconnecting our two upstream
>>>>>> locations, about once every 6 or 7 months the mikrotik renegotiates to
>>>>>> 100mbps. disable/enable the port fixes it.
>>>>>>
>>>>>> Ive never been able to reproduce it because it only happens once or
>>>>>> twice a year.
>>>>>>
>>>>>> Is there a script i can run on the mikrotik that monitors that
>>>>>> specific port and flaps it if it is ever not running 1gbps?
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

Reply via email to