There is no RJ45 input on the SBJTP version. We power lots of other RJ45 devices of the S16 with special cables. This is a different animal
From: Af [mailto:[email protected]] On Behalf Of Josh Baird Sent: Thursday, June 15, 2017 10:21 AM To: [email protected] Subject: Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device If I understand your question.. just use the Canopy PoE pinout. We power SyncBox's from Netonix using this scheme. On Thu, Jun 15, 2017 at 10:19 AM, Paul McCall <[email protected]<mailto:[email protected]>> wrote: Hmmmm….. let me try again. I have a single FSK AP that is getting powered/ethernet successfully connected to a UBNT S16. I need to get sync to that radio. I want to power the SB Junior Timing Port Version by making a cable that I can connect to the S16 that will connect to one of the SBJTP timing ports to power it up. Unless that ALL FSKs timing ports actually would provide the power needed to power up the SBJTV ? with a “standard” cable whatever that means 😊 Paul From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Forrest Christian (List Account) Sent: Thursday, June 15, 2017 10:08 AM To: af <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device What type of fsk radio do you gave that doesn't do ups power? On Jun 15, 2017 9:04 AM, "Paul McCall" <[email protected]<mailto:[email protected]>> wrote: Syncbox Junior Timing Port Version From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Forrest Christian (List Account) Sent: Thursday, June 15, 2017 10:03 AM To: af <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] Powering a Syncbox Junior without a uGPS type device Which syncbox? On Jun 15, 2017 8:51 AM, "Paul McCall" <[email protected]<mailto:[email protected]>> wrote: Guys, We need to providing timing on a single FSK AP and it is fed up the tower through fiber to a UBNT S16. (so its powering off the S16). I want to use one timing port to output timing to the FSK (as normal) and one port to receive power from the S16 and need to figure out the pinout (wiring diagram) to make that happen. Paul Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800<tel:(772)%20564-6800> [email protected]<mailto:[email protected]> www.pdmnet.com<http://www.pdmnet.com> www.floridabroadband.com<http://www.floridabroadband.com>
