Not so... the 900mhz variety is 450i, and they do support sync over power (according to Cambium... I haven't actually tried it).
On Thu, Jun 15, 2017 at 12:34 PM, George Skorup <george.sko...@cbcast.com> wrote: > The PTP450 is just SM hardware (900 included). Sync over power is not on > the board. Timing port only. > > On 6/15/2017 10:48 AM, Mathew Howard wrote: > > Nope, that's all you need. > > No, they don't have any built in GPS, but you don't really need it if > you're just doing one link and it doesn't need to sync with anything else. > If you do need sync, then you'd need to get some type of GPS for the > Master radio... they support both sync over power and timing port, so just > about any of the Canopy sync products should work.... I'd use something > from PacketFlux, personally. > > On Thu, Jun 15, 2017 at 10:22 AM, Jeff Broadwick - Lists <jeffl...@att.net > > wrote: > >> For a PTP link? >> >> Jeff Broadwick >> ConVergence Technologies, Inc. >> 312-205-2519 <%28312%29%20205-2519> Office >> 574-220-7826 <%28574%29%20220-7826> Cell >> jbroadw...@converge-tech.com >> >> On Jun 15, 2017, at 11:07 AM, Christopher Gray < >> cg...@graytechsoftware.com> wrote: >> >> To setup a PTP450 900 MHz link, is there anything I need other than 2x >> radios, 2x antennas and power to run a link? >> >> Do they come with GPS receivers like ePMP does, or do they need a >> separate device? >> >> Thank you - Chris >> >> > >