We tried it on one radio of the four in question.
Faisal Imtiaz wrote:
hmm.. sounds like you have some other issue going on ...
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: [email protected]
----- Original Message -----
From: "CBB - Jay Fuller" <[email protected]>
To: [email protected]
Sent: Thursday, June 15, 2017 6:03:05 PM
Subject: Re: [AFMUG] Netonix/Mimosa compatibility.
We tried the Mimosa brick and it didn't help but that was prior to
trying Mimosa's suggestion of moving to Cat6 . We've tried locking it to
100 meg full duplex and it held a connection but I am not sure if we
tried 1 gig half.
Faisal Imtiaz wrote:
Here is what I would suggest.
1) Use the Mimosa Brick, for testing, and see if that fixes your issue
if it does then consider, using a different port or 48VH power etc to see
if the
issue is on then netonix side.
if you still have the same issue with Mimosa Brick then you know the
problem is
else ware.
BWT.. if you lock both sides (Radio & Netonix) to 100meg full duplex or even 1G
half duplex do they hold the connection ?
Regards.
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: [email protected]
----- Original Message -----
From: "CBB - Jay Fuller" <[email protected]>
To: [email protected]
Sent: Thursday, June 15, 2017 5:06:16 PM
Subject: Re: [AFMUG] Netonix/Mimosa compatibility.
Oh, and no surge protector at the moment.
Faisal Imtiaz wrote:
have not seen that issue ...
Are you using 48VH port ? or just 48V ?
and is there a surge protector in the middle ?
Regards
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: [email protected]
----- Original Message -----
From: "CBB - Jay Fuller" <[email protected]>
To: [email protected]
Sent: Thursday, June 15, 2017 4:44:38 PM
Subject: [AFMUG] Netonix/Mimosa compatibility.
Has anyone experience a compatibility problem when using Mimosa radios
with Netonix for power? We've got a problem with gigabit link
negotiation issues where link will alternate between a gig and no link.
We've upgraded to Cat 6 and are still seeing the issue.
---
This email has been checked for viruses by AVG.
http://www.avg.com
