Too my knowledge there is no wireless other than us at either location.

Sean Heskett wrote:
Does this tower have an FM radio station located on it??

-sean



On Thu, Jun 15, 2017 at 4:58 PM Jay Weekley <[email protected] <mailto:[email protected]>> wrote:

    At the moment it's two Mimosa radios at one tower and one radio at
    another that have the issue. We replaced our Shireen Cat 5 with
    Shireen
    Cat 6 and Shireen connectors and the link negotiation problem seems to
    have gotten better but the Netonix still shows cable errors though a
    standard cable tester shows continuity and correct pin out. I may
    contact Netonix and see if they can give me a clue as to what problem
    their unit is detecting.

    Bill Prince wrote:
    > Have you just plugged into a laptop or anything besides the Netonix?
    > We've had at least one situation with a bad port on a Netonix switch
    > that had symptoms similar to this.
    >
    > bp
    > <part15sbs{at}gmail{dot}com>
    >
    > On 6/15/2017 3:44 PM, Jay Weekley wrote:
    >> We tried it on one radio of the four in question.
    >>
    >> Faisal Imtiaz wrote:
    >>> hmm.. sounds like you have some other issue going on ...
    >>>
    >>> Faisal Imtiaz
    >>> Snappy Internet & Telecom
    >>> 7266 SW 48 Street
    >>> Miami, FL 33155
    >>> Tel: 305 663 5518 x 232
    >>>
    >>> Help-desk: (305)663-5518 Option 2 or Email:
    [email protected]
    >>>
    >>> ----- Original Message -----
    >>>> From: "CBB - Jay Fuller" <[email protected]
    <mailto:[email protected]>>
    >>>> To: [email protected] <mailto:[email protected]>
    >>>> Sent: Thursday, June 15, 2017 6:03:05 PM
    >>>> Subject: Re: [AFMUG] Netonix/Mimosa compatibility.
    >>>> We tried the Mimosa brick and it didn't help but that was
    prior to
    >>>> trying Mimosa's suggestion of moving to Cat6 . We've tried
    locking
    >>>> it to
    >>>> 100 meg full duplex and it held a connection but I am not
    sure if we
    >>>> tried 1 gig half.
    >>>>
    >>>> Faisal Imtiaz wrote:
    >>>>> Here is what I would suggest.
    >>>>>
    >>>>> 1) Use the Mimosa Brick, for testing, and see if that fixes your
    >>>>> issue
    >>>>>      if it does then consider, using a different port or 48VH
    >>>>> power etc to see if the
    >>>>>      issue is on then netonix side.
    >>>>>
    >>>>>      if you still have the same issue with Mimosa Brick then you
    >>>>> know the problem is
    >>>>>      else ware.
    >>>>>
    >>>>> BWT.. if you lock both sides (Radio & Netonix) to 100meg full
    >>>>> duplex  or even 1G
    >>>>> half duplex do they hold the connection ?
    >>>>>
    >>>>> Regards.
    >>>>>
    >>>>> Faisal Imtiaz
    >>>>> Snappy Internet & Telecom
    >>>>> 7266 SW 48 Street
    >>>>> Miami, FL 33155
    >>>>> Tel: 305 663 5518 x 232
    >>>>>
    >>>>> Help-desk: (305)663-5518 Option 2 or Email:
    [email protected]
    >>>>>
    >>>>> ----- Original Message -----
    >>>>>> From: "CBB - Jay Fuller" <[email protected]
    <mailto:[email protected]>>
    >>>>>> To: [email protected] <mailto:[email protected]>
    >>>>>> Sent: Thursday, June 15, 2017 5:06:16 PM
    >>>>>> Subject: Re: [AFMUG] Netonix/Mimosa compatibility.
    >>>>>> Oh, and no surge protector at the moment.
    >>>>>>
    >>>>>> Faisal Imtiaz wrote:
    >>>>>>> have not seen that issue ...
    >>>>>>>
    >>>>>>> Are you using 48VH port ? or just 48V ?
    >>>>>>> and is there a surge protector in the middle ?
    >>>>>>>
    >>>>>>> Regards
    >>>>>>>
    >>>>>>> Faisal Imtiaz
    >>>>>>> Snappy Internet & Telecom
    >>>>>>> 7266 SW 48 Street
    >>>>>>> Miami, FL 33155
    >>>>>>> Tel: 305 663 5518 x 232
    >>>>>>>
    >>>>>>> Help-desk: (305)663-5518 Option 2 or Email:
    >>>>>>> [email protected]
    >>>>>>>
    >>>>>>> ----- Original Message -----
    >>>>>>>> From: "CBB - Jay Fuller" <[email protected]
    <mailto:[email protected]>>
    >>>>>>>> To: [email protected] <mailto:[email protected]>
    >>>>>>>> Sent: Thursday, June 15, 2017 4:44:38 PM
    >>>>>>>> Subject: [AFMUG] Netonix/Mimosa compatibility.
    >>>>>>>> Has anyone experience a compatibility problem when using
    Mimosa
    >>>>>>>> radios
    >>>>>>>> with Netonix for power? We've got a problem with gigabit link
    >>>>>>>> negotiation issues where link will alternate between a
    gig and
    >>>>>>>> no link.
    >>>>>>>> We've upgraded to Cat 6 and are still seeing the issue.
    >>>>>>> ---
    >>>>>>> This email has been checked for viruses by AVG.
    >>>>>>> http://www.avg.com
    >>
    >
    >


<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

Reply via email to