Keep the loop length in mind when using a patch cable. If it's 200 feet
from the cabinet to the AP and 150 feet from the cabinet to the AF24,
then total loop length is 350 feet which is over the 100m spec. If
length isn't an issue, are you using surge suppressors? Also, one pin
missing on any of the RJ45s will break GigE. I've certainly seen that
before.
On 8/27/2017 4:47 PM, CBB - Jay Fuller wrote:
We have an airfiber feeding a single 5 ghz airprism ubnt device.�
Selling high packages.
Initially the two are just connected together with a patch cable from
lan to lan on the power injectors.
noticed they are only connecting at 100 meg.� I suspected they'd
connect at a gig.
Before I replace the patch cable or / and add a switch, should they
negotiate at 1 gig with only
patch cables?
