Throw the switch in there and you'll find out real fast which one is not negotiating at Gig-E.
On Sun, Aug 27, 2017 at 6:38 PM, CBB - Jay Fuller <par...@cyberbroadband.net > wrote: > > will do :) > > > ----- Original Message ----- > *From:* Josh Reynolds <j...@kyneticwifi.com> > *To:* af@afmug.com > *Sent:* Sunday, August 27, 2017 5:34 PM > *Subject:* Re: [AFMUG] gig power injectors > > They are gig. Change the patch. > > On Aug 27, 2017 5:14 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> > wrote: > >> >> This is on a parking deck....not 15 feet to the radios....power supplies >> are like 4 feet apart. >> i have not changed out the patch cable yet...but i thought it was a bit >> thin. >> thought i'd ask here first. i'll try changing out the patch cable next >> i did verify the patch cable was not one of those with only 4 wires in >> it... >> >> >> ----- Original Message ----- >> *From:* George Skorup <george.sko...@cbcast.com> >> *To:* af@afmug.com >> *Sent:* Sunday, August 27, 2017 4:59 PM >> *Subject:* Re: [AFMUG] gig power injectors >> >> Keep the loop length in mind when using a patch cable. If it's 200 feet >> from the cabinet to the AP and 150 feet from the cabinet to the AF24, then >> total loop length is 350 feet which is over the 100m spec. If length isn't >> an issue, are you using surge suppressors? Also, one pin missing on any of >> the RJ45s will break GigE. I've certainly seen that before. >> >> On 8/27/2017 4:47 PM, CBB - Jay Fuller wrote: >> >> � >> We have an airfiber feeding a single 5 ghz airprism ubnt device.� >> Selling high packages. >> Initially the two are just connected together with a patch cable from lan >> to lan on the power injectors. >> noticed they are only connecting at 100 meg.� I suspected they'd >> connect at a gig. >> � >> Before I replace the patch cable or / and add a switch, should they >> negotiate at 1 gig with only >> patch cables? >> � >> � >> >> >>
