will do :) ----- Original Message ----- From: Josh Reynolds To: [email protected] Sent: Sunday, August 27, 2017 5:34 PM Subject: Re: [AFMUG] gig power injectors
They are gig. Change the patch. On Aug 27, 2017 5:14 PM, "CBB - Jay Fuller" <[email protected]> wrote: This is on a parking deck....not 15 feet to the radios....power supplies are like 4 feet apart. i have not changed out the patch cable yet...but i thought it was a bit thin. thought i'd ask here first. i'll try changing out the patch cable next i did verify the patch cable was not one of those with only 4 wires in it... ----- Original Message ----- From: George Skorup To: [email protected] Sent: Sunday, August 27, 2017 4:59 PM Subject: Re: [AFMUG] gig power injectors Keep the loop length in mind when using a patch cable. If it's 200 feet from the cabinet to the AP and 150 feet from the cabinet to the AF24, then total loop length is 350 feet which is over the 100m spec. If length isn't an issue, are you using surge suppressors? Also, one pin missing on any of the RJ45s will break GigE. I've certainly seen that before. On 8/27/2017 4:47 PM, CBB - Jay Fuller wrote: � We have an airfiber feeding a single 5 ghz airprism ubnt device.� Selling high packages. Initially the two are just connected together with a patch cable from lan to lan on the power injectors. noticed they are only connecting at 100 meg.� I suspected they'd connect at a gig. � Before I replace the patch cable or / and add a switch, should they negotiate at 1 gig with only patch cables? � �
