I've never used those. Seems like people either love em or hate em.
I imagine it must be easier to maintain the maximum untwist amount. It
seems like you could keep shoving the wires through until you only have
the 1/4" of untwisted wire you're looking for. That's pure speculation
though.
------ Original Message ------
From: "Jason McKemie" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 12/13/2017 1:30:58 PM
Subject: Re: [AFMUG] Cable crimpers for RJ-45 work
I used those when I first started, I am also not a fan. I had all kinds
of problems with getting them to fit the Ethernet port on Canopy SMs,
the release tab didn't want to snap into place. Having said that, I
still have a couple of the Platinum Tools crimpers and they work fine.
On Wednesday, December 13, 2017, Bill Prince <[email protected]>
wrote:
Oh. Those "easy-RJ45" things? I hate those.
bp
<part15sbs{at}gmail{dot}com>
On 12/13/2017 9:08 AM, Jaime Solorza wrote:
The guys I work with use nothing but pass through RJ-45 connectors so
I am looking at Klein one.
Jaime Solorza
On Dec 13, 2017 10:05 AM, "Bill Prince" <[email protected]> wrote:
Passthrough RJ45? Or other style connectors? Only the RJ45 is done
from the end. The other dies go in from the side (as is typical).
bp
<part15sbs{at}gmail{dot}com>
On 12/13/2017 9:01 AM, Jaime Solorza wrote:
does it work with pass through connectors?
Jaime Solorza
Wireless Systems Architect
915-861-1390 <tel:%28915%29%20861-1390>
On Wed, Dec 13, 2017 at 9:59 AM, Bill Prince <[email protected]>
wrote:
I have a Paladin that has replaceable dies. It's a little
different in that you insert the RJ45 from the end instead of the
side. I have dies for all the usual suspects, RJ45, RJ11, BNC, N
connectors, etc.
https://www.amazon.com/Greenlee-PA8033-Ergonomic-CrimpALL-Crimper/dp/B00006HYWF?SubscriptionId=AKIAI6T6MQZ3NIEZLJXQ&tag=hanutt0f-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B00006HYWF&ascsubtag=534fd1a1-e9c8-4552-bc51-40082f82ce65
<https://www.amazon.com/Greenlee-PA8033-Ergonomic-CrimpALL-Crimper/dp/B00006HYWF?SubscriptionId=AKIAI6T6MQZ3NIEZLJXQ&tag=hanutt0f-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B00006HYWF&ascsubtag=534fd1a1-e9c8-4552-bc51-40082f82ce65>
bp
<part15sbs{at}gmail{dot}com>
On 12/13/2017 8:37 AM, Jaime Solorza wrote:
What are you kool kats using for your LAN cable crimps?
Mine started breaking end of connectors and caused some issues.
Luckily I had a spare...looking at the Klein one but open to
suggestions.
thanks
Jaime Solorza
Wireless Systems Architect
915-861-1390 <tel:%28915%29%20861-1390>
