The quality of connectors is suspect... Jaime Solorza
On Dec 13, 2017 11:40 AM, "Adam Moffett" <[email protected]> wrote: I've never used those. Seems like people either love em or hate em. I imagine it must be easier to maintain the maximum untwist amount. It seems like you could keep shoving the wires through until you only have the 1/4" of untwisted wire you're looking for. That's pure speculation though. ------ Original Message ------ From: "Jason McKemie" <[email protected]> To: "[email protected]" <[email protected]> Sent: 12/13/2017 1:30:58 PM Subject: Re: [AFMUG] Cable crimpers for RJ-45 work I used those when I first started, I am also not a fan. I had all kinds of problems with getting them to fit the Ethernet port on Canopy SMs, the release tab didn't want to snap into place. Having said that, I still have a couple of the Platinum Tools crimpers and they work fine. On Wednesday, December 13, 2017, Bill Prince <[email protected]> wrote: > Oh. Those "easy-RJ45" things? I hate those. > > bp > <part15sbs{at}gmail{dot}com> > > > On 12/13/2017 9:08 AM, Jaime Solorza wrote: > > The guys I work with use nothing but pass through RJ-45 connectors so I am > looking at Klein one. > > Jaime Solorza > > On Dec 13, 2017 10:05 AM, "Bill Prince" <[email protected]> wrote: > >> Passthrough RJ45? Or other style connectors? Only the RJ45 is done from >> the end. The other dies go in from the side (as is typical). >> >> bp >> <part15sbs{at}gmail{dot}com> >> >> >> On 12/13/2017 9:01 AM, Jaime Solorza wrote: >> >> does it work with pass through connectors? >> >> Jaime Solorza >> Wireless Systems Architect >> 915-861-1390 <%28915%29%20861-1390> >> >> On Wed, Dec 13, 2017 at 9:59 AM, Bill Prince <[email protected]> wrote: >> >>> I have a Paladin that has replaceable dies. It's a little different in >>> that you insert the RJ45 from the end instead of the side. I have dies for >>> all the usual suspects, RJ45, RJ11, BNC, N connectors, etc. >>> >>> https://www.amazon.com/Greenlee-PA8033-Ergonomic-CrimpALL-Cr >>> imper/dp/B00006HYWF?SubscriptionId=AKIAI6T6MQZ3NIEZLJXQ&tag= >>> hanutt0f-20&linkCode=xm2&camp=2025&creative=165953&creativeA >>> SIN=B00006HYWF&ascsubtag=534fd1a1-e9c8-4552-bc51-40082f82ce65 >>> >>> bp >>> <part15sbs{at}gmail{dot}com> >>> >>> >>> On 12/13/2017 8:37 AM, Jaime Solorza wrote: >>> >>> What are you kool kats using for your LAN cable crimps? >>> Mine started breaking end of connectors and caused some issues. Luckily >>> I had a spare...looking at the Klein one but open to suggestions. >>> thanks >>> Jaime Solorza >>> Wireless Systems Architect >>> 915-861-1390 <%28915%29%20861-1390> >>> >>> >>> >> >> >
