How hard is it to just throw in a brand new PC? What if you had the files from the old one?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 22, 2017 5:01 PM, "Forrest Christian (List Account)" < [email protected]> wrote: If I could put it on a VM, I would definitely consider it. Unfortunately, due to the fact that these machines are not really 'servers' or 'workstations' but instead 'automation/test platforms', that is not really a possibility. The OS on these machines need direct access to the hardware. Often, the drivers/software are doing horrible things under the surface to windows to make it work. Adding a VM layer just isn't practical in this case. National Instruments describes it best: "NI hardware is not supported on VMs due to communication challenges and the possibility of incorrect data.Virtual machines generally cannot access the PCI bus. As such, PCI- and PCIe-based instruments are inherently incompatible with VMs, as are MXI connected PXI and PXIe chassis. Modern VMs often allow access to USB ports (known as USB pass-through). Given the hosted nature of the VM, the variable speed of data transfer associated with USB pass-through may cause errors when communicating with DAQ devices." My experience is that even pci or pcie passthrough which is supported in some VM's still isn't enough to permit this stuff to run reliably - it's a lot like the USB-passthrough issue described above. In my experience, failures are usually going to be software or disk, not the underlying hardware. If the underlying hardware fails, I realize that I'm stuck unless I have identical hardware. Knowing this, I often actually have an identical motherboard and/or server setting as part of the spares. And by identical, I mean exact version, often bought at the same time, or from the same batch. On Fri, Dec 22, 2017 at 10:08 AM, Josh Luthman <[email protected]> wrote: > Images for Windows between any two machines simply isn't dependable. DO > NOT EXPECT IT TO WORK. > > Now if you can put all your stuff in a VM, you're set. Put it in Dropbox > for a cheap smart (bit change only) backup. > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> > Suite 1337 > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> > Troy, OH 45373 > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> > > On Dec 21, 2017 11:06 PM, "Forrest Christian (List Account)" < > [email protected]> wrote: > >> Normally backups around here are file-based, I.E. I want to make sure I >> don't lose data. >> >> I have a couple of computers now which I really would hate to have to >> rebuild due to hardware failure. These are generally computers which run a >> machine, such as the automatic test system and the pick and place machine. >> These machines area all typically single-drive (non-mirrored) mostly off >> the shelf hardware running various versions of windows. I'd like to take >> a full image, and have at least a reasonable chance of putting it back on >> similar hardware (probably same motherboard, maybe different storage >> medium) and it just work. >> >> It used to be that the tool for this was Norton Ghost. But that's been >> discontinued (and I understand it was going downhill before that). So I'm >> looking for whatever the current modern version is. >> >> I know there's a few tools out there which do this (Macrium, Acronis, >> etc). But the reviews are all littered with failures. Unfortunately >> it's hard to tell how much of this is lack of clue and how much of this is >> broken software. >> >> I'm wondering if anyone has experience with using these modern >> equivalents? Preferably something which runs on a range of Windows OS'es, >> and can dump the image onto NAS. >> >> -- >> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >> <https://maps.google.com/?q=3577+Countryside+Road,+Helena,+MT+59602&entry=gmail&source=g> >> [email protected] | http://www.packetflux.com >> <http://www.linkedin.com/in/fwchristian> >> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >> >> -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 <https://maps.google.com/?q=3577+Countryside+Road,+Helena,+MT+59602&entry=gmail&source=g> [email protected] | http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux>
