The syncbox junior Aux port that Neil mentioned is what we recommend for most people if they are powering the radios in another way. If you use this for sync, then I don't see any reason why you couldn't just hardwire the appropriate pins in a CAT5 cable to a 56V power supply and skip the CMM5 altogether. This of course would prevent remote power control unless you used something like a packetflux PDU to control the power.
The cambium sync card for the rackinjector is coming, will be up for pre-orders (hopefully early) next week, 99% sure shipping by the end of January. There will be a detailed explanation of the exact schedule up on the web site when we put the units up for preorder. We were going to have them up this past week, but we decided we didn't need to book the income in 2017 since the tax man is already taking too much from us in 2017. We'll give that a month or two of being in the field then will likely release this circuitry in a powerinjector form factor for the 450i/450m. On Fri, Dec 29, 2017 at 10:00 AM, Andreas Wiatowski < [email protected]> wrote: > I don’t have a CMM5. I have been using CMM4 and Packetflux over the > years. I didn’t know PF had a Medusa capable unit on the market…I will > take a look. > > > > Cheers, > > > > Andreas Wiatowski, CEO > > Silo Wireless Inc. > > 1-866-727-4138 x-600 <(866)%20727-4138> > > http://www.silowireless.com > > Wireless | Fibre | VoIP | PBX | IPTV > > > > Silo Wireless is a Proud Member of: > > CanWISP http://www.canwisp.ca > > WISPA http://wispa.org > > Brantford Brant Chamber of Commerce > > Paris Chamber of Commerce > > Cambridge Chamber of Commerce > > > > > > _________________________________ > > The contents of this email message and any attachments are intended solely > for the addressee(s) and may contain confidential and/or privileged > information and may be legally protected from disclosure. If you are not > the intended recipient of this message or their agent, or if this message > has been addressed to you in error, please immediately alert the sender by > reply email and then delete this message and any attachments. If you are > not the intended recipient, you are hereby notified that any use, > dissemination, copying, or storage of this message or its attachments is > strictly prohibited. > > > > > > *From: *Af <[email protected]> on behalf of "[email protected]" < > [email protected]> > *Reply-To: *"[email protected]" <[email protected]> > *Date: *Friday, December 29, 2017 at 11:47 AM > > *To: *"[email protected]" <[email protected]> > *Subject: *Re: [AFMUG] 450M maximum length of Cat5e (Just for power) > > > > Do you already have the CMM5? If not I would use Packetflux. > > > > *From:* Andreas Wiatowski > > *Sent:* Friday, December 29, 2017 9:43 AM > > *To:* [email protected] > > *Subject:* Re: [AFMUG] 450M maximum length of Cat5e (Just for power) > > > > We need power and timing, but no data… hence the CMM5. > > > > Cheers, > > > > Andreas Wiatowski, CEO > > Silo Wireless Inc. > > 1-866-727-4138 x-600 <(866)%20727-4138> > > http://www.silowireless.com > > Wireless | Fibre | VoIP | PBX | IPTV > > > > Silo Wireless is a Proud Member of: > > CanWISP http://www.canwisp.ca > > WISPA http://wispa.org > > Brantford Brant Chamber of Commerce > > Paris Chamber of Commerce > > Cambridge Chamber of Commerce > > > > > > _________________________________ > > The contents of this email message and any attachments are intended solely > for the addressee(s) and may contain confidential and/or privileged > information and may be legally protected from disclosure. If you are not > the intended recipient of this message or their agent, or if this message > has been addressed to you in error, please immediately alert the sender by > reply email and then delete this message and any attachments. If you are > not the intended recipient, you are hereby notified that any use, > dissemination, copying, or storage of this message or its attachments is > strictly prohibited. > > > > > > *From: *Af <[email protected]> on behalf of "[email protected]" < > [email protected]> > *Reply-To: *"[email protected]" <[email protected]> > *Date: *Friday, December 29, 2017 at 11:06 AM > *To: *"[email protected]" <[email protected]> > *Subject: *Re: [AFMUG] 450M maximum length of Cat5e (Just for power) > > > > I would work out ohms law on it to make sure. > > Do you need to run data over the CAT 5? > > If not, you really don’t need the CMM5, just connect all the wires of > similar polarity and connect direct to the power supply. > > > > *From:* Andreas Wiatowski > > *Sent:* Friday, December 29, 2017 7:14 AM > > *To:* [email protected] > > *Subject:* [AFMUG] 450M maximum length of Cat5e (Just for power) > > > > Good Morning, > > > > We have a couple of large towers where we will be installing 450M with > fibre. To power we, would like to use the CMM5 , but we are unsure if we > can power the M sufficiently over such a long CAT 5 run. Does anyone have > the answer to this? We could see cat5 runs (Shielded and gell filled) of > upto 500ft! > > > > Cheers, > > > > Andreas Wiatowski, CEO > > Silo Wireless Inc. > > 1-866-727-4138 x-600 <(866)%20727-4138> > > http://www.silowireless.com > > Wireless | Fibre | VoIP | PBX | IPTV > > > > Silo Wireless is a Proud Member of: > > CanWISP http://www.canwisp.ca > > WISPA http://wispa.org > > Brantford Brant Chamber of Commerce > > Paris Chamber of Commerce > > Cambridge Chamber of Commerce > > > > > > _________________________________ > > The contents of this email message and any attachments are intended solely > for the addressee(s) and may contain confidential and/or privileged > information and may be legally protected from disclosure. If you are not > the intended recipient of this message or their agent, or if this message > has been addressed to you in error, please immediately alert the sender by > reply email and then delete this message and any attachments. If you are > not the intended recipient, you are hereby notified that any use, > dissemination, copying, or storage of this message or its attachments is > strictly prohibited. > > > -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux>
